دورية أكاديمية
Bioprinting of Perfusable, Biocompatible Vessel-like Channels with dECM-Based Bioinks and Living Cells
| العنوان: | Bioprinting of Perfusable, Biocompatible Vessel-like Channels with dECM-Based Bioinks and Living Cells |
|---|---|
| المؤلفون: | Marta Klak, Michał Rachalewski, Anna Filip, Tomasz Dobrzański, Andrzej Berman, Michał Wszoła |
| المصدر: | Bioengineering, Vol 11, Iss 5, p 439 (2024) |
| بيانات النشر: | MDPI AG, 2024. |
| سنة النشر: | 2024 |
| المجموعة: | LCC:Technology LCC:Biology (General) |
| مصطلحات موضوعية: | bioprinting, vessels, endothelial cells, bioink, perfusion, extracellular matrix, Technology, Biology (General), QH301-705.5 |
| الوصف: | There is a growing interest in the production of bioinks that on the one hand, are biocompatible and, on the other hand, have mechanical properties that allow for the production of stable constructs that can survive for a long time after transplantation. While the selection of the right material is crucial for bioprinting, there is another equally important issue that is currently being extensively researched—the incorporation of the vascular system into the fabricated scaffolds. Therefore, in the following manuscript, we present the results of research on bioink with unique physico-chemical and biological properties. In this article, two methods of seeding cells were tested using bioink B and seeding after bioprinting the whole model. After 2, 5, 8, or 24 h of incubation, the flow medium was used in the tested systems. At the end of the experimental trial, for each time variant, the canals were stored in formaldehyde, and immunohistochemical staining was performed to examine the presence of cells on the canal walls and roof. Cells adhered to both ways of fiber arrangement; however, a parallel bioprint with the 5 h incubation and the intermediate plating of cells resulted in better adhesion efficiency. For this test variant, the percentage of cells that adhered was at least 20% higher than in the other analyzed variants. In addition, it was for this variant that the lowest percentage of viable cells was found that were washed out of the tested model. Importantly, hematoxylin and eosin staining showed that after 8 days of culture, the cells were evenly distributed throughout the canal roof. Our study clearly shows that neovascularization-promoting cells effectively adhere to ECM-based pancreatic bioink. Summarizing the presented results, it was demonstrated that the proposed bioink compositions can be used for bioprinting bionic organs with a vascular system formed by endothelial cells and fibroblasts. |
| نوع الوثيقة: | article |
| وصف الملف: | electronic resource |
| اللغة: | English |
| تدمد: | 2306-5354 |
| العلاقة: | https://www.mdpi.com/2306-5354/11/5/439Test; https://doaj.org/toc/2306-5354Test |
| DOI: | 10.3390/bioengineering11050439 |
| الوصول الحر: | https://doaj.org/article/18f89dc6a3034087b9965f4084b93f42Test |
| رقم الانضمام: | edsdoj.18f89dc6a3034087b9965f4084b93f42 |
| قاعدة البيانات: | Directory of Open Access Journals |
Full Text Finder | تدمد: | 23065354 |
|---|---|
| DOI: | 10.3390/bioengineering11050439 |