دورية أكاديمية
Cork extractives exhibit thermo-oxidative protection properties in polypropylene-cork composites and as direct additives for polypropylene
| العنوان: | Cork extractives exhibit thermo-oxidative protection properties in polypropylene-cork composites and as direct additives for polypropylene |
|---|---|
| المؤلفون: | Aroso, Ivo Manuel Ascensão, Fernandes, E. M., Pires, R. A., Mano, J. F., Reis, R. L. |
| بيانات النشر: | Elsevier 1 |
| سنة النشر: | 2015 |
| المجموعة: | Universidade of Minho: RepositóriUM |
| مصطلحات موضوعية: | Composites, Cork, Oxidation induction time, Oxidation onset temperature, Polypropylene, Thermo-oxidation, Science & Technology |
| الوصف: | The thermo-oxidative stability of polypropylene (PP) in composites containing 15 wt.% of cork and the performance of selected cork extracts as stabilizing additives for PP was evaluated by Oxidation Induction Time (OIT) and by Oxidation Onset Temperature (OOT). The results showed that cork increases the OIT of PP in the composite and it was identified that the cork extractives fraction is responsible for such behavior. Selected cork extracts with high antioxidant capacity (determined by dpph radical scavenging and oxygen reactive absorbance capacity assays) were compounded by extrusion with PP in 0.5 and 1.5 wt.%. It was found that the ethanol extract is the most effective as thermo-oxidative stabilizer for PP. At the loading level of 1.5%, the OIT increases from 3.8 (neat PP) to 29.7 min at 200 °C and from 1.2 (neat PP) to 9.0 min at 220 °C. The OOT also increases from 216 °C (neat PP) to 247 °C. Mechanical tests, performed on PP loaded with the cork extracts, showed that the presence of these extracts has no significant effect on the polymer mechanical performance. The results demonstrate the suitability of cork as a source of thermo-oxidative stabilizing additives for the formulation of polyolefins, and enable the exploitation of new routes of cork valorization. ; The authors are grateful to Amorim Cork Composites for providing the cork powder raw material. Ivo Aroso and Emanuel Fernandes are grateful for financial support of FCT through grants SFRH/BD/42273/2007 and SFRH/BPD/96197/2013, respectively. Funding was also granted from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no REGPOT-CT2012-316331-POLARIS and from Project "Novel smart and biomimetic materials for innovative regenerative medicine approaches (Ref.: RL1-ABMR-NORTE-01-0124-FEDER-000016)" co-financed by North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF). |
| نوع الوثيقة: | article in journal/newspaper |
| وصف الملف: | application/pdf |
| اللغة: | English |
| تدمد: | 0141-3910 |
| العلاقة: | info:eu-repo/grantAgreement/EC/FP7/316331/EU; info:eu-repo/grantAgreement/FCT/SFRH/SFRH%2FBD%2F42273%2F2007/PT; info:eu-repo/grantAgreement/FCT/SFRH/SFRH%2FBPD%2F96197%2F2013/PT; http://www.sciencedirect.com/science/article/pii/S0141391015000889Test; https://hdl.handle.net/1822/35027Test |
| DOI: | 10.1016/j.polymdegradstab.2015.03.006 |
| الإتاحة: | https://doi.org/10.1016/j.polymdegradstab.2015.03.006Test https://hdl.handle.net/1822/35027Test |
| حقوق: | info:eu-repo/semantics/openAccess |
| رقم الانضمام: | edsbas.C9B27A4E |
| قاعدة البيانات: | BASE |
| تدمد: | 01413910 |
|---|---|
| DOI: | 10.1016/j.polymdegradstab.2015.03.006 |