التفاصيل البيبلوغرافية
العنوان: |
Research on Roof Fracture Characteristics of Gob-Side Entry Retaining with Roof Cutting and Non-Pillar Mining in Thick Coal Seam, China ... : بحث عن خصائص كسر السقف للاحتفاظ بالدخول من جانب الفوهة مع قطع السقف والتعدين غير القائم في طبقات الفحم السميكة، الصين ... |
المؤلفون: |
Zhu Li, Mengye Zhao, Qiongxiang Huang, Kai Xu, Yongbo Wu, Wentao Gu |
بيانات النشر: |
OpenAlex |
سنة النشر: |
2021 |
المجموعة: |
DataCite Metadata Store (German National Library of Science and Technology) |
مصطلحات موضوعية: |
Study on Rock Mechanics in Deep Mining Engineering, Mechanics of Materials, Engineering, Physical Sciences, Rock Mechanics and Engineering, Rock Mechanics and Wave Propagation in Geomedia, Mining Induced Seismicity, Mining Engineering, Roof, Coal mining, Microseism, Mining engineering, Overburden, Geology, FOS Earth and related environmental sciences, Coal, Pillar, Fracture geology, Geotechnical engineering, Structural engineering, Seismology, Waste management |
الوصف: |
Based on the S1201-2 large height mining in the 2-2 coal seam of Ningtiaota colliery with on-site microseismic measurement, physical simulation and theoretical analysis methods, this paper explores the rule of roof movement in thick coal seams with roof cutting and non-pillar (hereinafter referred to as RCN-P) mining, so as to obtain scientific and effective theoretical basis for entry support and to summarize the regional structural characteristics and dynamic periodic fracture characteristics. As can be seen from microseismic events, the entry roof is featured by "two zones and one line" along the horizontal direction, namely, the crack generation area, the roof movement area. Additionally, and the obvious lateral breaking of the entry roof on the coal wall is a typical feature of the thick coal seam with RCN-P mining. The roof is vertically divided into "three zones", the crack generation area, the roof movement area and the crack development area. The roof cutting activity mainly affects the ... : الملخص استنادًا إلى تعدين S1201 -2 ذو الارتفاع الكبير في طبقة الفحم 2-2 في منجم نينغتياوتا مع القياس الزلزالي الدقيق في الموقع والمحاكاة الفيزيائية وطرق التحليل النظري، تستكشف هذه الورقة قاعدة حركة السقف في طبقات الفحم السميكة مع قطع السقف والتعدين غير القائم (المشار إليه فيما يلي باسم RCN - P)، وذلك للحصول على أساس نظري علمي وفعال لدعم الدخول وتلخيص الخصائص الهيكلية الإقليمية وخصائص الكسر الدوري الديناميكي. كما يتضح من الأحداث الزلزالية الدقيقة، يتميز سقف الدخول بـ "منطقتين وخط واحد" على طول الاتجاه الأفقي، أي منطقة توليد الشقوق، ومنطقة حركة السقف. بالإضافة إلى ذلك، فإن التكسير الجانبي الواضح لسقف الدخول على جدار الفحم هو سمة نموذجية لطبقة الفحم السميكة مع تعدين RCN - P. ينقسم السقف عموديًا إلى "ثلاث مناطق"، ومنطقة توليد الشقوق، ومنطقة حركة السقف ومنطقة تطوير الشقوق. يؤثر نشاط قطع السقف بشكل أساسي على نشاط العبء الزائد ضمن نطاق ارتفاع السقف الأساسي، والذي يعد أيضًا منطقة حركة السقف. بالإضافة إلى ذلك، يشير تواتر التوزيع وشدة الأحداث الزلزالية الدقيقة إلى خصائص الكسر الدوري للسقف. يتوافق "تخفيف ضغط الكسر" و ... |
نوع الوثيقة: |
text |
اللغة: |
English |
العلاقة: |
https://dx.doi.org/10.60692/88rmr-wfh55Test |
DOI: |
10.60692/mzsjc-mwq23 |
الإتاحة: |
https://doi.org/10.60692/mzsjc-mwq2310.60692/88rmr-wfh55Test |
حقوق: |
cc-by |
رقم الانضمام: |
edsbas.BCFBD9F1 |
قاعدة البيانات: |
BASE |