دورية أكاديمية

Hybrid biobased recyclable epoxy composites for mass production

التفاصيل البيبلوغرافية
العنوان: Hybrid biobased recyclable epoxy composites for mass production
المؤلفون: Cicala, G., Mannino, S., La Rosa, A. D., Banatao, D. R., Pastine, S. J., Kosinski, S. T., Scarpa, F.
المصدر: Cicala , G , Mannino , S , La Rosa , A D , Banatao , D R , Pastine , S J , Kosinski , S T & Scarpa , F 2018 , ' Hybrid biobased recyclable epoxy composites for mass production ' , Polymer Composites , vol. 39 , pp. E2217-E2225 . https://doi.org/10.1002/pc.24582Test
سنة النشر: 2018
المجموعة: University of Bristol: Bristol Reserach
الوصف: Hybrid flax/carbon composites were studied in this artcle. The matrix used was developed using a sustainable green epoxy monomer cured by a novel cleavable amine. The combination of cleavable amine with green epoxy monomers led to a fully recyclable composite. The laminates were manufactured by using High Pressure Resin Transfer Molding with injection cycles down to 25 sec and cure cycles of 8 min at 120°C, followed by postcuring at 120°C for 1 h. The effect of the stacking sequence of the laminates was analyzed in terms of the tensile, flexural, and impact properties. A chemical recycling was also performed and the mechanical properties of the recovered thermoplastic measured. POLYM. COMPOS., 39:E2217–E2225, 2018.
نوع الوثيقة: article in journal/newspaper
اللغة: English
العلاقة: https://research-information.bris.ac.uk/en/publications/e8d00d67-7f6c-420d-b82d-5242feb65710Test
DOI: 10.1002/pc.24582
الإتاحة: https://doi.org/10.1002/pc.24582Test
https://hdl.handle.net/1983/e8d00d67-7f6c-420d-b82d-5242feb65710Test
https://research-information.bris.ac.uk/en/publications/e8d00d67-7f6c-420d-b82d-5242feb65710Test
http://www.scopus.com/inward/record.url?scp=85057713776&partnerID=8YFLogxKTest
حقوق: info:eu-repo/semantics/restrictedAccess
رقم الانضمام: edsbas.A9F583DB
قاعدة البيانات: BASE