Bendable Focusing X-Ray Optics for the ALS and the LCLS/FEL: Design, Metrology, and Performance

التفاصيل البيبلوغرافية
العنوان: Bendable Focusing X-Ray Optics for the ALS and the LCLS/FEL: Design, Metrology, and Performance
المؤلفون: Yashchuk, V. V., Yuan, S., Baker, S., Bozek, J., Celestre, R., Church, M., Goldberg, K. A., Fernandez-Perea, M., Kelez, N., Kunz, M., McKinney, W. R., Morrison, G., Padmore, H. A., Soufli, R., Tamura, N., Warwick, T.
سنة النشر: 2010
المجموعة: SciTec Connect (Office of Scientific and Technical Information - OSTI, U.S. Department of Energy)
مصطلحات موضوعية: ADVANCED LIGHT SOURCE, ALIGNMENT, BENDING, DESIGN, FABRICATION, FERMILAB ACCELERATOR, FOCUSING, FREE ELECTRON LASERS, INTERFEROMETRY, LIGHT SOURCES, LINEAR ACCELERATORS, OPTICS, PERFORMANCE, PHOTONS, SHAPE, STANFORD LINEAR ACCELERATOR CENTER, SUBSTRATES, TUNING
الوقت: 42, 46, 47
الوصف: We review the recent development of bendable x-ray optics used for focusing of beams of soft and hard x-rays at the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory and at the Linac Coherent Light Source (LCLS) x-ray free electron laser (FEL) at the Stanford Linear Accelerator Center (SLAC) National Accelerator Laboratory. For simultaneous focusing in the tangential and sagittal directions, two elliptically cylindrical reflecting elements, a Kirkpatrick-Baez (KB) pair, are used. Because fabrication of elliptical surfaces is complicated, the cost of directly fabricated tangential elliptical cylinders is often prohibitive. Moreover, such optics cannot be easily readjusted for use in multiple, different experimental arrangements, e.g. at different focal distances. This is in contrast to flat optics that are simpler to manufacture and easier to measure by conventional interferometry. The tangential figure of a flat substrate is changed by placing torques (couples) at each end. Depending on the applied couples, one can tune the shape close to a desired tangential cylinder, ellipse or parabola. We review the nature of the bending, requirements and approaches to the mechanical design, describe original optical and at-wavelength techniques for optimal tuning of bendable optics and alignment on the beamline, and provide beamline performance of the bendable optics used for sub-micro and nano focusing of soft x-rays.
نوع الوثيقة: other/unknown material
وصف الملف: application/pdf
اللغة: unknown
العلاقة: http://www.osti.gov/servlets/purl/984308Test; https://www.osti.gov/biblio/984308Test
الإتاحة: http://www.osti.gov/servlets/purl/984308Test
https://www.osti.gov/biblio/984308Test
رقم الانضمام: edsbas.9DC5FE08
قاعدة البيانات: BASE