A 600W 6.78MHz wireless charger for an electric scooter

التفاصيل البيبلوغرافية
العنوان: A 600W 6.78MHz wireless charger for an electric scooter
المؤلفون: Kwan, C, Arteaga Saenz, J, Aldhaher, S, Yates, D, Mitcheson, P
المساهمون: Engineering & Physical Science Research Council (E
المصدر: IEEE PELS WoW 2020 ; 282 ; 278
بيانات النشر: IEEE
سنة النشر: 2020
المجموعة: Imperial College London: Spiral
جغرافية الموضوع: Seoul, Korea (Virtual)
الوصف: This paper presents a 600 W electric scooter wireless charging solution operating at a frequency of 6.78 MHz. At the transmitter end, a load-independent Class EF push-pull(differential) inverter with GaN transistors was used to drive a 33 cm square-shaped copper pipe coil. A full-wave voltage-triplerClass D rectifier with silicon Schottky diodes was connected to a24 cm-by-26 cm trapezoidal receiver coil (also made of copperpipe) mounted underneath the steel frame of the scooter. In order to reduce the eddy current and magnetic losses in the steel chassis, parts of the electric scooter frame were shielded with copper tape. With the battery recharging in situ at 600 W,the IPT system achieved a DC-to-DC efficiency of 84 %.
نوع الوثيقة: conference object
اللغة: unknown
العلاقة: 2020 IEEE PELS Workshop on Emerging Technologies: Wireless Power Transfer (WoW); http://hdl.handle.net/10044/1/83619Test; EP/R511547/1; 73719 (EP/R029504/1); Ref: R122041-101/86440
DOI: 10.1109/WoW47795.2020.9291303
الإتاحة: https://doi.org/10.1109/WoW47795.2020.9291303Test
http://hdl.handle.net/10044/1/83619Test
حقوق: © 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
رقم الانضمام: edsbas.5F1F570E
قاعدة البيانات: BASE