دورية أكاديمية
Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design
العنوان: | Thermal Properties of Eco-Friendly Earthen Materials Stabilized with Bio-Based Polymers: Experimental Data and Modeling Procedure for Improving Mix-Design |
---|---|
المؤلفون: | Cappai, Marta, Shoukat, Rizwan, Pilia, Luca, Ricciu, Roberto, Lai, Daniele, Marongiu, Gianluca, Pia, Giorgio |
المساهمون: | Cappai, Marta, Shoukat, Rizwan, Pilia, Luca, Ricciu, Roberto, Lai, Daniele, Marongiu, Gianluca, Pia, Giorgio |
سنة النشر: | 2024 |
المجموعة: | Università degli Studi di Cagliari: UNICA IRIS |
مصطلحات موضوعية: | bio-based polymer, earth-based material, eco-friendly material, mix-design, modeling, thermal properties |
الوصف: | The fight against climate change has delineated new objectives, among which one of the most crucial is the replacement of high-energy-intensity materials in the construction sector with more sustainable and thermally efficient alternatives to reduce indirect emissions. Consequently, the thermal properties of materials assume fundamental importance. In this regard, the large-scale use of earth represents a promising option, not only due to its widespread availability but especially for its minimal embodied energy. However, to enhance its durability, it is necessary to stabilize the mixtures of raw materials. This study analyzes experimental systems based on earth stabilized with bio-based polymers to evaluate their thermal properties and how these vary depending on the selected mix-design. The experimental measurements showed thermal properties comparable to conventional materials. As expected, thermal conductivity increases when porosity decreases. The minimum value is equal to 0.216 W/m·K vs. a porosity of 43.5%, while the maximum is 0.507 W/m·K vs. a porosity of 33.2%. However, the data obtained for individual systems may vary depending on the topological characteristics, which were analyzed through a model for granular materials. The modeling suggests correlations between microstructures and thermal behaviour, which can be useful to develop tools for the mix-design procedure. |
نوع الوثيقة: | article in journal/newspaper |
اللغة: | English |
العلاقة: | info:eu-repo/semantics/altIdentifier/pmid/38473506; info:eu-repo/semantics/altIdentifier/wos/WOS:001182747100001; volume:17; issue:5; numberofpages:15; journal:MATERIALS; https://hdl.handle.net/11584/392426Test; info:eu-repo/semantics/altIdentifier/scopus/2-s2.0-85187682331; https://www.mdpi.com/1996-1944/17/5/1035Test |
DOI: | 10.3390/ma17051035 |
الإتاحة: | https://doi.org/10.3390/ma17051035Test https://hdl.handle.net/11584/392426Test https://www.mdpi.com/1996-1944/17/5/1035Test |
حقوق: | info:eu-repo/semantics/openAccess |
رقم الانضمام: | edsbas.311A4899 |
قاعدة البيانات: | BASE |
DOI: | 10.3390/ma17051035 |
---|