Strain Transfer of Fiber Bragg Grating Sensor Externally Bonded to FRP Strip for Structural Monitoring after Reinforcement
| العنوان: | Strain Transfer of Fiber Bragg Grating Sensor Externally Bonded to FRP Strip for Structural Monitoring after Reinforcement |
|---|---|
| المؤلفون: | Hyun-Do Yun, Gun-Cheol Lee, Jeong-Hun Park, Seongwon Hong, Soo-Yeon Seo, Kang Su Kim |
| المصدر: | Materials Volume 14 Issue 16 Materials, Vol 14, Iss 4382, p 4382 (2021) |
| بيانات النشر: | Multidisciplinary Digital Publishing Institute, 2021. |
| سنة النشر: | 2021 |
| مصطلحات موضوعية: | Technology, Optical fiber, Materials science, optical fiber sensor, adhesion length, Article, law.invention, fiber Bragg grating, epoxy resin, Fiber Bragg grating, law, General Materials Science, Composite material, Reinforcement, fiber-reinforced polymer strip, Tensile testing, Microscopy, QC120-168.85, sensing performance, QH201-278.5, Adhesion, Epoxy, Fibre-reinforced plastic, Engineering (General). Civil engineering (General), TK1-9971, monitoring, Descriptive and experimental mechanics, Fiber optic sensor, visual_art, visual_art.visual_art_medium, Electrical engineering. Electronics. Nuclear engineering, TA1-2040 |
| الوصف: | To date, a method of attaching a FRP (fiber-reinforced polymer) to concrete members with epoxy has been widely applied to increase the strength of the member. However, there are cases in which the adhesion of the epoxy deteriorates over time and the reinforcing effect of the FRP is gradually lost. Therefore, monitoring whether or not the reinforcing effect is properly maintained is needed in order to prevent a decrease in the structural performance of the member improved by FRP reinforcement. In this regard, this study examines FRP with OF (optical fiber) sensors to monitor the reinforcing effect of FRP in concrete structural members. In particular, this paper seeks to determine an appropriate adhesion length when FBG (fiber Bragg grating) based OF sensors are externally bonded to FRP strips with epoxy resin. To this end, a tensile test was carried out to evaluate the sensing performance according to the adhesion length. In addition, an analytical approach was performed and the result were compared with test result. The results of the experimental and analytical studies showed that the strain generated in the FRP is sufficiently transferred to the OF if the total adhesion length of it is 40 mm or more in consideration of the error in the epoxy thickness. |
| وصف الملف: | application/pdf |
| اللغة: | English |
| تدمد: | 1996-1944 |
| DOI: | 10.3390/ma14164382 |
| الوصول الحر: | https://explore.openaire.eu/search/publication?articleId=doi_dedup___::74055a9a7da72f262ac30ae9fc04c485Test |
| حقوق: | OPEN |
| رقم الانضمام: | edsair.doi.dedup.....74055a9a7da72f262ac30ae9fc04c485 |
| قاعدة البيانات: | OpenAIRE |
| ResultId |
1 |
|---|---|
| Header |
edsair OpenAIRE edsair.doi.dedup.....74055a9a7da72f262ac30ae9fc04c485 868 3 unknown 868.087219238281 |
| PLink |
https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&scope=site&db=edsair&AN=edsair.doi.dedup.....74055a9a7da72f262ac30ae9fc04c485&custid=s6537998&authtype=sso |
| FullText |
Array
(
[Availability] => 0
)
|
| Items |
Array
(
[Name] => Title
[Label] => Title
[Group] => Ti
[Data] => Strain Transfer of Fiber Bragg Grating Sensor Externally Bonded to FRP Strip for Structural Monitoring after Reinforcement
)
Array ( [Name] => Author [Label] => Authors [Group] => Au [Data] => <searchLink fieldCode="AR" term="%22Hyun-Do+Yun%22">Hyun-Do Yun</searchLink><br /><searchLink fieldCode="AR" term="%22Gun-Cheol+Lee%22">Gun-Cheol Lee</searchLink><br /><searchLink fieldCode="AR" term="%22Jeong-Hun+Park%22">Jeong-Hun Park</searchLink><br /><searchLink fieldCode="AR" term="%22Seongwon+Hong%22">Seongwon Hong</searchLink><br /><searchLink fieldCode="AR" term="%22Soo-Yeon+Seo%22">Soo-Yeon Seo</searchLink><br /><searchLink fieldCode="AR" term="%22Kang+Su+Kim%22">Kang Su Kim</searchLink> ) Array ( [Name] => TitleSource [Label] => Source [Group] => Src [Data] => Materials<br />Volume 14<br />Issue 16<br />Materials, Vol 14, Iss 4382, p 4382 (2021) ) Array ( [Name] => Publisher [Label] => Publisher Information [Group] => PubInfo [Data] => Multidisciplinary Digital Publishing Institute, 2021. ) Array ( [Name] => DatePubCY [Label] => Publication Year [Group] => Date [Data] => 2021 ) Array ( [Name] => Subject [Label] => Subject Terms [Group] => Su [Data] => <searchLink fieldCode="DE" term="%22Technology%22">Technology</searchLink><br /><searchLink fieldCode="DE" term="%22Optical+fiber%22">Optical fiber</searchLink><br /><searchLink fieldCode="DE" term="%22Materials+science%22">Materials science</searchLink><br /><searchLink fieldCode="DE" term="%22optical+fiber+sensor%22">optical fiber sensor</searchLink><br /><searchLink fieldCode="DE" term="%22adhesion+length%22">adhesion length</searchLink><br /><searchLink fieldCode="DE" term="%22Article%22">Article</searchLink><br /><searchLink fieldCode="DE" term="%22law%2Einvention%22">law.invention</searchLink><br /><searchLink fieldCode="DE" term="%22fiber+Bragg+grating%22">fiber Bragg grating</searchLink><br /><searchLink fieldCode="DE" term="%22epoxy+resin%22">epoxy resin</searchLink><br /><searchLink fieldCode="DE" term="%22Fiber+Bragg+grating%22">Fiber Bragg grating</searchLink><br /><searchLink fieldCode="DE" term="%22law%22">law</searchLink><br /><searchLink fieldCode="DE" term="%22General+Materials+Science%22">General Materials Science</searchLink><br /><searchLink fieldCode="DE" term="%22Composite+material%22">Composite material</searchLink><br /><searchLink fieldCode="DE" term="%22Reinforcement%22">Reinforcement</searchLink><br /><searchLink fieldCode="DE" term="%22fiber-reinforced+polymer+strip%22">fiber-reinforced polymer strip</searchLink><br /><searchLink fieldCode="DE" term="%22Tensile+testing%22">Tensile testing</searchLink><br /><searchLink fieldCode="DE" term="%22Microscopy%22">Microscopy</searchLink><br /><searchLink fieldCode="DE" term="%22QC120-168%2E85%22">QC120-168.85</searchLink><br /><searchLink fieldCode="DE" term="%22sensing+performance%22">sensing performance</searchLink><br /><searchLink fieldCode="DE" term="%22QH201-278%2E5%22">QH201-278.5</searchLink><br /><searchLink fieldCode="DE" term="%22Adhesion%22">Adhesion</searchLink><br /><searchLink fieldCode="DE" term="%22Epoxy%22">Epoxy</searchLink><br /><searchLink fieldCode="DE" term="%22Fibre-reinforced+plastic%22">Fibre-reinforced plastic</searchLink><br /><searchLink fieldCode="DE" term="%22Engineering+%28General%29%2E+Civil+engineering+%28General%29%22">Engineering (General). Civil engineering (General)</searchLink><br /><searchLink fieldCode="DE" term="%22TK1-9971%22">TK1-9971</searchLink><br /><searchLink fieldCode="DE" term="%22monitoring%22">monitoring</searchLink><br /><searchLink fieldCode="DE" term="%22Descriptive+and+experimental+mechanics%22">Descriptive and experimental mechanics</searchLink><br /><searchLink fieldCode="DE" term="%22Fiber+optic+sensor%22">Fiber optic sensor</searchLink><br /><searchLink fieldCode="DE" term="%22visual%5Fart%22">visual_art</searchLink><br /><searchLink fieldCode="DE" term="%22visual%5Fart%2Evisual%5Fart%5Fmedium%22">visual_art.visual_art_medium</searchLink><br /><searchLink fieldCode="DE" term="%22Electrical+engineering%2E+Electronics%2E+Nuclear+engineering%22">Electrical engineering. Electronics. Nuclear engineering</searchLink><br /><searchLink fieldCode="DE" term="%22TA1-2040%22">TA1-2040</searchLink> ) Array ( [Name] => Abstract [Label] => Description [Group] => Ab [Data] => To date, a method of attaching a FRP (fiber-reinforced polymer) to concrete members with epoxy has been widely applied to increase the strength of the member. However, there are cases in which the adhesion of the epoxy deteriorates over time and the reinforcing effect of the FRP is gradually lost. Therefore, monitoring whether or not the reinforcing effect is properly maintained is needed in order to prevent a decrease in the structural performance of the member improved by FRP reinforcement. In this regard, this study examines FRP with OF (optical fiber) sensors to monitor the reinforcing effect of FRP in concrete structural members. In particular, this paper seeks to determine an appropriate adhesion length when FBG (fiber Bragg grating) based OF sensors are externally bonded to FRP strips with epoxy resin. To this end, a tensile test was carried out to evaluate the sensing performance according to the adhesion length. In addition, an analytical approach was performed and the result were compared with test result. The results of the experimental and analytical studies showed that the strain generated in the FRP is sufficiently transferred to the OF if the total adhesion length of it is 40 mm or more in consideration of the error in the epoxy thickness. ) Array ( [Name] => Format [Label] => File Description [Group] => SrcInfo [Data] => application/pdf ) Array ( [Name] => Language [Label] => Language [Group] => Lang [Data] => English ) Array ( [Name] => ISSN [Label] => ISSN [Group] => ISSN [Data] => 1996-1944 ) Array ( [Name] => DOI [Label] => DOI [Group] => ID [Data] => 10.3390/ma14164382 ) Array ( [Name] => URL [Label] => Access URL [Group] => URL [Data] => <link linkTarget="URL" linkTerm="https://explore.openaire.eu/search/publication?articleId=doi_dedup___::74055a9a7da72f262ac30ae9fc04c485" linkWindow="_blank">https://explore.openaire.eu/search/publication?articleId=doi_dedup___::74055a9a7da72f262ac30ae9fc04c485</link> ) Array ( [Name] => Copyright [Label] => Rights [Group] => Cpyrght [Data] => OPEN ) Array ( [Name] => AN [Label] => Accession Number [Group] => ID [Data] => edsair.doi.dedup.....74055a9a7da72f262ac30ae9fc04c485 ) |
| RecordInfo |
Array
(
[BibEntity] => Array
(
[Identifiers] => Array
(
[0] => Array
(
[Type] => doi
[Value] => 10.3390/ma14164382
)
)
[Languages] => Array
(
[0] => Array
(
[Text] => English
)
)
[Subjects] => Array
(
[0] => Array
(
[SubjectFull] => Technology
[Type] => general
)
[1] => Array
(
[SubjectFull] => Optical fiber
[Type] => general
)
[2] => Array
(
[SubjectFull] => Materials science
[Type] => general
)
[3] => Array
(
[SubjectFull] => optical fiber sensor
[Type] => general
)
[4] => Array
(
[SubjectFull] => adhesion length
[Type] => general
)
[5] => Array
(
[SubjectFull] => Article
[Type] => general
)
[6] => Array
(
[SubjectFull] => law.invention
[Type] => general
)
[7] => Array
(
[SubjectFull] => fiber Bragg grating
[Type] => general
)
[8] => Array
(
[SubjectFull] => epoxy resin
[Type] => general
)
[9] => Array
(
[SubjectFull] => Fiber Bragg grating
[Type] => general
)
[10] => Array
(
[SubjectFull] => law
[Type] => general
)
[11] => Array
(
[SubjectFull] => General Materials Science
[Type] => general
)
[12] => Array
(
[SubjectFull] => Composite material
[Type] => general
)
[13] => Array
(
[SubjectFull] => Reinforcement
[Type] => general
)
[14] => Array
(
[SubjectFull] => fiber-reinforced polymer strip
[Type] => general
)
[15] => Array
(
[SubjectFull] => Tensile testing
[Type] => general
)
[16] => Array
(
[SubjectFull] => Microscopy
[Type] => general
)
[17] => Array
(
[SubjectFull] => QC120-168.85
[Type] => general
)
[18] => Array
(
[SubjectFull] => sensing performance
[Type] => general
)
[19] => Array
(
[SubjectFull] => QH201-278.5
[Type] => general
)
[20] => Array
(
[SubjectFull] => Adhesion
[Type] => general
)
[21] => Array
(
[SubjectFull] => Epoxy
[Type] => general
)
[22] => Array
(
[SubjectFull] => Fibre-reinforced plastic
[Type] => general
)
[23] => Array
(
[SubjectFull] => Engineering (General). Civil engineering (General)
[Type] => general
)
[24] => Array
(
[SubjectFull] => TK1-9971
[Type] => general
)
[25] => Array
(
[SubjectFull] => monitoring
[Type] => general
)
[26] => Array
(
[SubjectFull] => Descriptive and experimental mechanics
[Type] => general
)
[27] => Array
(
[SubjectFull] => Fiber optic sensor
[Type] => general
)
[28] => Array
(
[SubjectFull] => visual_art
[Type] => general
)
[29] => Array
(
[SubjectFull] => visual_art.visual_art_medium
[Type] => general
)
[30] => Array
(
[SubjectFull] => Electrical engineering. Electronics. Nuclear engineering
[Type] => general
)
[31] => Array
(
[SubjectFull] => TA1-2040
[Type] => general
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Strain Transfer of Fiber Bragg Grating Sensor Externally Bonded to FRP Strip for Structural Monitoring after Reinforcement
[Type] => main
)
)
)
[BibRelationships] => Array
(
[HasContributorRelationships] => Array
(
[0] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Hyun-Do Yun
)
)
)
[1] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Gun-Cheol Lee
)
)
)
[2] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Jeong-Hun Park
)
)
)
[3] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Seongwon Hong
)
)
)
[4] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Soo-Yeon Seo
)
)
)
[5] => Array
(
[PersonEntity] => Array
(
[Name] => Array
(
[NameFull] => Kang Su Kim
)
)
)
)
[IsPartOfRelationships] => Array
(
[0] => Array
(
[BibEntity] => Array
(
[Dates] => Array
(
[0] => Array
(
[D] => 05
[M] => 08
[Type] => published
[Y] => 2021
)
)
[Identifiers] => Array
(
[0] => Array
(
[Type] => issn-print
[Value] => 19961944
)
[1] => Array
(
[Type] => issn-locals
[Value] => edsair
)
[2] => Array
(
[Type] => issn-locals
[Value] => edsairFT
)
)
[Titles] => Array
(
[0] => Array
(
[TitleFull] => Materials
[Type] => main
)
)
)
)
)
)
)
|
| IllustrationInfo |