Analysis of a DC Collector-based Power Converter Topology for an Offshore Wind Farm

التفاصيل البيبلوغرافية
العنوان: Analysis of a DC Collector-based Power Converter Topology for an Offshore Wind Farm
المؤلفون: Ramesh C. Bansal, Kabeya Musasa, M. N. Gitau
المصدر: Electric Power Components and Systems. 43:1113-1121
بيانات النشر: Informa UK Limited, 2015.
سنة النشر: 2015
مصطلحات موضوعية: Forward converter, Engineering, business.industry, Buck converter, Flyback converter, Mechanical Engineering, Ćuk converter, Buck–boost converter, Electrical engineering, Energy Engineering and Power Technology, Topology, Power optimizer, Offshore wind power, Boost converter, Electrical and Electronic Engineering, business
الوصف: The conventional collection grids for offshore wind farm consist of internal AC link comprising of series-parallel connections of identical wind energy conversion units (WECUs). Each WECU includes a 60- or 50-Hz power transformer. The power transformers are replaced by the power converters in this article. The weight of a power converter is much lower compared, to that of a power transformer of similar characteristics, thus reducing the weight of the offshore wind farm. Most of the studies being done to design DC collection grids use the conventional full-bridge voltage source converter as the topology of power converter. The efficiency of the wind farm is low due to the switching losses. In this article a cascade connection of a diode rectifier and an interleaved DC-DC boost converter is used for the converter topology. The switches duty cycle is reduced, thus improving the efficiency of the wind farm. The dynamic model of the proposed power converter is derived, including its control schemes. Po...
تدمد: 1532-5016
1532-5008
الوصول الحر: https://explore.openaire.eu/search/publication?articleId=doi_________::4cc4dd34e9dfb312f092b1849217959aTest
https://doi.org/10.1080/15325008.2015.1024355Test
حقوق: OPEN
رقم الانضمام: edsair.doi...........4cc4dd34e9dfb312f092b1849217959a
قاعدة البيانات: OpenAIRE