دورية أكاديمية
Hydraulic transients for a pipe line network of treated effluent rising main using SAP 2R
العنوان: | Hydraulic transients for a pipe line network of treated effluent rising main using SAP 2R |
---|---|
المؤلفون: | Ajmal Hussain, Muhammad Mustafa, Hazi Mohammad Azamathulla, M. R. Sadique |
المصدر: | Water Supply, Vol 22, Iss 2, Pp 1293-1305 (2022) |
بيانات النشر: | IWA Publishing, 2022. |
سنة النشر: | 2022 |
المجموعة: | LCC:Water supply for domestic and industrial purposes LCC:River, lake, and water-supply engineering (General) |
مصطلحات موضوعية: | cavitations, hydraulic transient, pipe network, sap2r, water hammer, Water supply for domestic and industrial purposes, TD201-500, River, lake, and water-supply engineering (General), TC401-506 |
الوصف: | Hydraulic transients occur as a direct result of rapid variations of flow field in pressurized systems. The change in velocity from valve closures or pump operations causes pressure surges that are propagated away from the source throughout the pipeline. The associated pressure changes during a transient period are quite large and occur quickly (within a few seconds). It should also be noted that when the maximum pressures exceed the bar ratings (mechanical strength) of the piping material, failure can occur. Similarly, if the minimum pressure drops below the vapour pressure of the fluid, cavitation can occur. The purpose of the present study is to model and simulate the hydraulic transients in a pipeline network system of the treated effluent rising main of Mpophomeni sanitation scheme using SAP 2R. A total of five scenarios were simulated using different combinations. The simulation results show that the transient pressures in the pipeline exceeded the bar rating of the pipe where the bursts or cavitation may occur for the simulated scenario, but transient pressures were reduced to a safe limit after providing water hammer protection devices. HIGHLIGHTS Water hammer analysis is done on a pipe line network system using SAP2R.; Water hammer pressure is observed and discussed on various sections of the pipeline.; The method of characteristics is used for solving the hydraulic transient equations.; Water hammer protection devices are suggested to keep transient pressure to a safe limit.; |
نوع الوثيقة: | article |
وصف الملف: | electronic resource |
اللغة: | English |
تدمد: | 1606-9749 1607-0798 |
العلاقة: | http://ws.iwaponline.com/content/22/2/1293Test; https://doaj.org/toc/1606-9749Test; https://doaj.org/toc/1607-0798Test |
DOI: | 10.2166/ws.2021.352 |
الوصول الحر: | https://doaj.org/article/5cab8ffa8d214038bae802e09bf62a65Test |
رقم الانضمام: | edsdoj.5cab8ffa8d214038bae802e09bf62a65 |
قاعدة البيانات: | Directory of Open Access Journals |
تدمد: | 16069749 16070798 |
---|---|
DOI: | 10.2166/ws.2021.352 |