-
1رسالة جامعية
المؤلفون: Río Cano, Carlos
المساهمون: University/Department: Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
مرشدي الرسالة: Codina Macià, Esteban, Comas Amengual, Ángel
المصدر: TDX (Tesis Doctorals en Xarxa)
مصطلحات موضوعية: Damping, Suspension, Coefficient of discharge (Cd), Amortiguación, Suspensión, Coeficiente de descarga (Cd), Soluciones analíticas, Analytical solutions, Computational fluid dynamics (CFD), Àrees temàtiques de la UPC::Enginyeria mecànica
وصف الملف: application/pdf
الوصول الحر: http://hdl.handle.net/10803/674225Test
-
2دورية أكاديمية
المؤلفون: Antonia Samylla Oliveira Almeida, Manoel do Vale Sales, Marlon Vieira De Lima, José Capelo Neto
المصدر: Revista DAE, Vol 70, Iss 238, Pp 154-162 (2022)
مصطلحات موضوعية: floculador de placas, coeficiente de descarga, relação x/s, Environmental technology. Sanitary engineering, TD1-1066, Environmental engineering, TA170-171, Environmental sciences, GE1-350
وصف الملف: electronic resource
العلاقة: http://revistadae.com.br/artigos/artigo_edicao_238_n_2088.pdfTest; https://doaj.org/toc/0101-6040Test
-
3
المؤلفون: Henriques, Simão Tiago Livramento
المساهمون: Brojo, Francisco Miguel Ribeiro Proença, uBibliorum
مصطلحات موضوعية: Caudal de Ar, Coeficiente de Descarga, Coeficiente de Fluxo, Motor de Combustão Interna, Sistema de Admissão, Domínio/Área Científica::Engenharia e Tecnologia::Engenharia Aeronáutica
وصف الملف: application/pdf
-
4دورية أكاديمية
المؤلفون: Carlos Santos, Luis Perez
المصدر: Inge-Cuc, Vol 16, Iss 1, Pp 285-298 (2020)
مصطلحات موضوعية: motores diésel, cfd, openfoam, coeficiente de descarga, coeficiente de torbellino, Engineering (General). Civil engineering (General), TA1-2040
وصف الملف: electronic resource
العلاقة: https://revistascientificas.cuc.edu.co/ingecuc/article/view/2783Test; https://doaj.org/toc/0122-6517Test; https://doaj.org/toc/2382-4700Test
-
5تقرير
المؤلفون: García-Cuevas González, Luis Miguel, García Tíscar, Jorge, Bares Moreno, Pau, Gil Megías, Antonio, Quintero Igeño, Pedro Manuel
المساهمون: Universitat Politècnica de València. Escuela Técnica Superior de Ingeniería del Diseño - Escola Tècnica Superior d'Enginyeria del Disseny, Universitat Politècnica de València. Departamento de Máquinas y Motores Térmicos - Departament de Màquines i Motors Tèrmics
مصطلحات موضوعية: Conductos, Pérdida de carga, Orificio, Coeficiente de descarga, 3301 - Ingeniería y tecnología aeronáutica
-
6دورية أكاديمية
المصدر: BISTUA Revista de la Facultad de Ciencias Básicas; Vol. 17 No. 1 (2019); 168-178 ; BISTUA Revista de la Facultad de Ciencias Básicas; Vol. 17 Núm. 1 (2019); 168-178 ; 2711-3027 ; 0120-4211
مصطلحات موضوعية: coeficiente de descarga, diseño del sistema de admisión, rendimiento volumétrico
وصف الملف: application/pdf
العلاقة: https://ojs.unipamplona.edu.co/index.php/bistua/article/view/281/254Test; https://ojs.unipamplona.edu.co/index.php/bistua/article/view/281Test
الإتاحة: https://doi.org/10.24054/bistua.v17i1.281Test
https://ojs.unipamplona.edu.co/index.php/bistua/article/view/281Test -
7دورية أكاديمية
المؤلفون: Mattos-Villarroel, Erick Dante, Flores-Velazquez, Jorge, Ojeda-Bustamante, Waldo, Iñiguez-Covarrubias, Mauro, Díaz-Delgado, Carlos, Salinas-Tapia, Humberto
المصدر: Tecnología y ciencias del agua; Vol. 12 Núm. 4 (2021): julio-agosto; 112-162 ; 2007-2422 ; 0187-8336 ; 10.24850/j-tyca-2021-v12-n4
مصطلحات موضوعية: Weir, numerical simulation, gauging, discharge coefficient, vertedor, simulación numérica, aforo, coeficiente de descarga
وصف الملف: application/pdf
العلاقة: http://www.revistatyca.org.mx/ojs/index.php/tyca/article/view/2429/2339Test; http://www.revistatyca.org.mx/ojs/index.php/tyca/article/view/2429/2340Test; http://www.revistatyca.org.mx/ojs/index.php/tyca/article/view/2429Test
الإتاحة: https://doi.org/10.24850/j-tyca-2021-04-03Test
https://doi.org/10.24850/j-tyca-2021-v12-n4Test
http://www.revistatyca.org.mx/ojs/index.php/tyca/article/view/2429Test -
8دورية أكاديمية
المؤلفون: Bernardino Salvador Rojas
المصدر: Revista de Investigación de Física, Vol 23, Iss 3 (2020)
مصطلحات موضوعية: Compuerta plana deslizable, compuerta desgarvadora, coeficiente de descarga, Physics, QC1-999
وصف الملف: electronic resource
العلاقة: https://revistasinvestigacion.unmsm.edu.pe/index.php/fisica/article/view/20316Test; https://doaj.org/toc/1605-7724Test; https://doaj.org/toc/1728-2977Test
-
9دورية أكاديمية
المؤلفون: Salvador Rojas, Bernardino
المصدر: Revista de Investigación de Física; Vol. 23 Núm. 3 (2020): 50 Aniversario de la EP de Ingeniería Mecánica de Fluidos; 66-71 ; Revista de Investigación de Física; Vol. 23 No. 3 (2020): 50th Anniversary of the EP of Mechanical Fluid Engineering; 66-71 ; 1728-2977 ; 1605-7724
مصطلحات موضوعية: Slide gate, sluice gate, discharge coefficient, Compuerta plana deslizable, compuerta desgarvadora, coeficiente de descarga
وصف الملف: application/pdf
العلاقة: https://revistasinvestigacion.unmsm.edu.pe/index.php/fisica/article/view/20316/16663Test; https://revistasinvestigacion.unmsm.edu.pe/index.php/fisica/article/view/20316Test
الإتاحة: https://doi.org/10.15381/rif.v23i3.20316Test
https://revistasinvestigacion.unmsm.edu.pe/index.php/fisica/article/view/20316Test -
10دورية أكاديمية
المؤلفون: Santos, Carlos, Perez, Luis, Duarte Forero, Jorge
مصطلحات موضوعية: Diesel engines, OpenFOAM, CFD, discharge coefficient, swirl motion, coeficiente de descarga, coeficiente de torbellino, motores Diesel
وصف الملف: application/pdf; text/html; application/xml
العلاقة: Inge Cuc; Y. Varola, H. F. Oztop, M. Firata & A. Kocab, “CFD Modeling of heat transfer and fluid flow inside a pent-roof type combustion,” Int Commun Heat Mass, vol. 37, no. 9, pp. 1366–1375, Nov. 2010. https://doi.org/10.1016/j.icheatmasstransfer.2010.07.003Test; S. Jiang, S. Zhu, H. Wen & S. Huang, “Parameter analysis of diesel helical intake port numerical desing,” Energy Procedia, vol. 16, Part A, pp. 558–563, 2012. https://doi.org/10.1016/j.egypro.2012.01.090Test; B. Jayashankara & V. Ganesan, “Effect of fuel injection timing and intake pressure on the performance of DI diesel Engine - A parametric study using CFD,” Energy Convers Manag, vol. 51, no. 10, pp. 1835–1848, 2009. http://dx.doi.org/10.1016/j.enconman.2009.11.006Test; G. Kalghatgi, “Developments in internal combustion engines and implications for combustion science and future transport fuels,” Proc Combust Inst, vol. 35, no. 1, pp. 101–115, 2014. https://doi.org/10.1016/j.proci.2014.10.002Test; A. Gil, Modelado tridimensional del flujo de aire en el cilindro de motores diesel de inyeccion directa. VA, ES: Reverte, 2007.; J. S. Meurer, “Die Erzeugung von Drehbewegungen der Luft in den Zylindern schnellaufender Viertakt-Dieselmaschinen durch die Einlaßorgane,” MAN-Forsch, n. 1, s. 8–22, 1951.; G. Thien, “Entwicklungsarbeiten an ventilkanälen on viertakt Diesel Motoren,” ÖIZ, vol. 8, n. 9, 1965.; T. Uzkan, C. Borgnakke & T. Morel, “Characterization of Flow produced by a high-swirl inlet port,” IHC, AA, MI, USA, SAE Technical Papers 830266, 1983. https://doi.org/10.4271/830266Test; J. Morea-Roy, M. Muñoz & F. Moreno, “Simulación numerica del ciclo operativo de un motor de encendido provocado,” Rev inter met num calc dis ing, vol. 15, no. 2, pp. 207–216, 1999. Disponible en http://hdl.handle.net/2099/4567Test; A. Rahiman, A. Razak, M. Samee & M. K. Ramis, “CFD Analysis of flow field development in a direct injection diesel engine with different manifolds,” Am J Fluid Dyn, vol. 4, no. 3, pp. 102–113, 2014. Available: http://article.sapub.org/10.5923.j.ajfd.20140403.03.htmlTest; R. Holkar, Y. N. Sule-Patil, S. M. Pise, Y. A. Godase & V. Jagadale, “Numerical simulation of steady flow through engine intake system using CFD,” IOSR JMCE, vol. 12, no. 1, pp. 30–45, 2015. Available: https://www.iosrjournals.orgTest/; J. V. Pastor, Movimiento del aire en motores diesel de inyeccion directa, VAL, ES: UPV, 1997.; G. Thien, “Derivation of the formulas for the evaluation of stationary flow measurements,” ÖIZ, AU, VIE, AVL-FA-Report Nº. 463/Gen./072, 1978.; G. Thien, “Entwicklungsarbeiten an Ventilkanalen von Viertakt Dieselmotoren,” ÖIZ, vol. 9, 1965.; J. C. Dent & J. A. Derham, “Air Motion in a Four-Stroke Direct Injection Diesel Engine,” IME, vol. 188, no. 21, pp. 269–280, Jun. 1974. https://doi.org/10.1243%2FPIME_PROC_1974_188_030_02Test; G. C. Davis & J. C. Kent, “Comparison of model calculations and experimental measurements of the bulk cylinder flow processes in a motored PROCO engine,” SAE, DET, USA, SAE Technical Paper 790290, 1979. https://doi.org/10.4271/790290Test; R. C. Engineers, “Information to clients on Ricardo’s Laser-Doppler velocimeter,” Ricardo Engineering Report, 1976.; A. Murakami, M. Arai & H. Hiroyasu, “Swirl Measurements and Modelling in Direct Injection Diesel Engines,” Univ Hiroshima, HIJ, JPN, SAE Technical Paper 880385, 1988. https://doi.org/10.4271/880385Test; R. Leal & J. L. Filgueiras, “Industrial airflows numerical simulation in ducts and devices using all-speed algorithm in structured meshes,” Ingeniare, vol. 26, no. 2, pp. 273–282, 2008. http://dx.doi.org/10.4067/S0718-33052018000200273Test; L. Rodríguez, M. Collado, E. Rodríguez & L. Patiño, “Análisis numérico del comportamiento del aire en un sistema de distribución de aire acondicionado empleando los modelos de turbulencia K-E, RNG K-E y el modelo de las tensiones de Reynolds,” Ingeniare, vol. 16, no. 2, pp. 370–382, 2008. http://dx.doi.org/10.4067/S0718-33052008000200012Test; G. P. Blair, H. B. Lau, A. Cartwright, B. D. Raghunathan & D. O. Mackey, “Coefficients of Discharge at the Aperatures of Engines,” J Engines, vol. 104, no. 3, pp. 2048–2062, 1995. https://doi.org/10.4271/952138Test; J. Derham, “Air Motion in a Four Stroke Direct Injection Diesel Engine,” Doctoral Thesis, LUT, Loughb, ENG, 1971. Available: https://hdl.handle.net/2134/36161Test; H. Fujimoto, T. Nakagawa, H. Kudo, T. Wakisaka & Y. Shimamotoc, “A study on the formation of vertical vortex in the cylinder of an I.C engine using CFD: Effect of intake valve closing timing,” JSAE , vol. 16, no. 4, pp. 349–355, 1995. https://doi.org/10.1016/0389-4304Test(95)00041-5; J. Benajes, X. Margot, J. Pastor & A. Gil, “Three dimensional calculation of the flow in a DI Diesel engine with variable swirl PORTS,” ATTCE, BCN, ES, SAE Technical Paper 2001-01-3230, 2001. https://doi.org/10.4271/2001-01-3230Test; S. Zirngibl, M. Prager & G. Wachtmeister, “Experimental and Simulative Approaches for the determination of the discharge coefficients for inlet and exhaust valves and ports in internal combustion engines,” presented SAE World Congress Experience, WCX™ 17, DET, USA, 2017. http://dx.doi.org/10.4271/2017-01-5022Test; S. F. Wang & B. E. Milton, “Investigation of the Helical Inlet Port,” presented in International Fall Fuels and Lubricants Meeting and Exposition, TIB, TLS, USA, Oct. 13-16, 1997. https://doi.org/10.4271/982539Test; G. M. Bianchi, G. Cantore & S. Fontanesi, “Turbulence Modelling in CFD Simulation of ICE Intake Flows: The Discharge Coefficient Prediction,” J Engines, vol. 111, sec. 3, pp. 1901–1918, 2002. http://dx.doi.org/10.4271/2002-01-1118Test; G. Tippelmann, “A new method of investigation of swirl ports,” SAE Transactions, vol. 86, sec. 3, pp. 1745–1757, 1977. https://doi.org/10.4271/770404Test; L. Stager & R. Reitz, presented in “Assessment of Diesel Engine Size-Scaling Relationships,” SAE World Congress, UW, DET, USA, 16-19 Apr. 2007. https://doi.org/10.4271/2007-01-0127Test; Ignacio Gómez IHM , “Motores,” igihm.com. Available: https://www.igihm.com/motoresTest/ (accessed aug. 12, 2019).; P. Stephenson & C. Rutland, “Modeling the Effects of Valve Lift Profile on Intake Flow and Emissions Behavior in a DI Diesel Engine,” Fuels and Lubricants Meeting and Exhibition, SAE, TOR, CA, 16-19 Oct. 1995. https://doi.org/10.4271/952430Test; F. Payri, J. Benajes, X. Margot & A. Gil, “CFD modeling of the in-cylinder flow in direct-injection Diesel engines,” Comput Fluids, vol. 33, no. 8, pp. 995–1021, Sep. 2004. https://doi.org/10.1016/j.compfluid.2003.09.003Test; A. M. Bharadwaj, K. Madhu, K. J. Seemanthini, K. G. Vismay, T. Aravind & A. M. Shivapuji, “Study of Swirl and Tumble Motion using CFD,” IJTRME, vol. 1, no. 2, pp. 5–8, 2013. Available from http://www.irdindia.in/journal_ijtarme/pdf/vol1_iss2/2.pdfTest; L. Staples, R. Reitz & C. Hergart, “An Experimental Investigation into Diesel Engine Size-Scaling Parameters,” SAE Int J Engines, vol. 2, no. 1, pp. 1068–1084 , 2009. https://doi.org/10.4271/2009-01-1124Test; Y. Shi & R. Reitz, “Study of Diesel Engine Size-Scaling Relationships Based on Turbulence and Chemistry Scales,” SAE World Congress & Exhibition, SAE, DET, USA, p. 1–21, 14-17 Apr. 2008. https://doi.org/10.4271/2008-01-0955Test; M. Tess, C. Lee & R. Reitz, “Diesel Engine Size Scaling at Medium Load without EGR,” SAE Int. J. Engines, vol. 1, no. 1, pp. 1993–2009, 2011. https://doi.org/10.4271/2011-01-1384Test; M. Masi, L. Artico & P. Gobbato, “Measurements of the Intake and In-Cylinder Flow Field to investigate the reliability of CFD Steady-state simulation for actual engines,” 12th International Conference on Engines & Vehicles, SAE, Capri, IT, 13-17 Sept. 2015. https://doi.org/10.4271/2015-24-2404Test; X. Yang, T.-W. Kuo, O. Guralp, R. O. Grover & P. Najt, “In-Cylinder Flow Correlations between steady flow bench and motored engine using computational fluid dynamics,” J Eng Gas Turbine Power J Eng Gas Turb Power, vol. 139, no. 7, pp. 1–8, 2017. https://doi.org/10.1115/1.4035627Test; B. V. V. S. U. Prasad, C. S. Sharma, T. N. C. Anand & R. V. Ravikrishna, “High swirl-inducing piston bowls in small diesel engines for emission reduction,” Applied Energy, vol. 88, no. 7, pp. 2355–2367, 2011. https://doi.org/10.1016/j.apenergy.2010.12.068Test; M. Battistoni, A. Cancellieri & F. Mariani, “Steady and Transient Fluid Dynamic Analysis of the tumble and swirl evolution on a 4V engine with independent intake valves action,” PF&L Meeting, SAE, RSMT, USA, 6-9 Oct. 2008. https://doi.org/10.4271/2008-01-2392Test; A. A. E.-S. Mohamed, S. Abo-Elfadl, A. E.-M. M. Nassib, “Effect of shroud and orientation angles of inlet valve on flow characteristic through helical-spiral inlet port in diesel engine,” J. Eng. Gas Turbines Power, vol. 139, no. 10, pp. 1–7, Oct. 2017. https://doi.org/10.1115/1.4036381Test; E. Barrientos, I. Bortel, M. Takats & J. Vavra, “Impact of intake induced swirl on combustion and emissions on a single cylinder diesel engine,” ICEF, ASME, GRVL, USA, 9–12 Oct. 2016. http://dx.doi.org/10.1115/ICEF2016-9325Test; 298; 285; 16; https://revistascientificas.cuc.edu.co/ingecuc/article/download/2783/3250Test; https://revistascientificas.cuc.edu.co/ingecuc/article/download/2783/3548Test; https://revistascientificas.cuc.edu.co/ingecuc/article/download/2783/3577Test; Núm. 2 , Año 2020 : (Julio-Diciembre); https://hdl.handle.net/11323/12266Test; https://doi.org/10.17981/ingecuc.16.2.2020.23Test
الإتاحة: https://doi.org/10.17981/ingecuc.16.2.2020.23Test
https://doi.org/10.1016/j.proci.2014.10.002Test
https://doi.org/10.4271/770404Test
https://doi.org/10.1115/1.4036381Test
https://hdl.handle.net/11323/12266Test
