المؤلفون: Silva, Jefferson Jeremias, Mello, Daniel Marcondes de, Pires, Ricardo Francisco, Dantas, Sandra Cristina

المصدر: Research, Society and Development; Vol. 11 No. 7; e9311729685 ; Research, Society and Development; Vol. 11 Núm. 7; e9311729685 ; Research, Society and Development; v. 11 n. 7; e9311729685 ; 2525-3409

مصطلحات موضوعية: Enseñanza de la termodinâmica, NRTL, UNIQUAC, Enfoque gamma-gamma, Modelado termodinámico, Ensino de Termodinâmica, Abordagem gamma-gamma, Modelagem termodinâmica, Thermodynamics Teaching, Gamma-gamma approach, Thermodynamic modelling

وصف الملف: application/pdf

العلاقة: https://rsdjournal.org/index.php/rsd/article/view/29685/25660Test; https://rsdjournal.org/index.php/rsd/article/view/29685Test

الإتاحة: https://doi.org/10.33448/rsd-v11i7.29685Test
https://rsdjournal.org/index.php/rsd/article/view/29685Test

المؤلفون: Oliveira, Lucas Aparecido, Cerqueira, Daniel Alves, Cardoso, Cássia Regina, Sousa, Nádia Guimarães

المصدر: Research, Society and Development; Vol. 11 No. 5; e48111528386 ; Research, Society and Development; Vol. 11 Núm. 5; e48111528386 ; Research, Society and Development; v. 11 n. 5; e48111528386 ; 2525-3409

مصطلحات موضوعية: Anhidrous etanol, Thermodynamic modelling, Simulation, Etanol Anhidro, Modelado Termodinámico, Simulación, Etanol anidro, Modelagem Termodinâmica, Simulação

وصف الملف: application/pdf

العلاقة: https://rsdjournal.org/index.php/rsd/article/view/28386/24765Test; https://rsdjournal.org/index.php/rsd/article/view/28386Test

الإتاحة: https://doi.org/10.33448/rsd-v11i5.28386Test
https://rsdjournal.org/index.php/rsd/article/view/28386Test

المؤلفون: Câmara, Hortência Nathânia Silva

المساهمون: Chiavone Filho, Osvaldo, http://lattes.cnpq.br/2987303944499102Test, http://lattes.cnpq.br/2621516646153655Test, Rios, Rafael Barbosa, Oliveira, Humberto Neves Maia de, http://lattes.cnpq.br/7302633941782540Test, Fernandes, Manoel Reginaldo

مصطلحات موضوعية: Modelagem termodinâmica, Óleo de soja, Etanol, Óleo de algodão, Hexano, CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA

وصف الملف: application/pdf

العلاقة: CÂMARA, Hortência Nathânia Silva. Avaliação dos dados de equilíbrio líquido-vapor em sistemas de interesse do biodiesel. Orientador: Dr. Osvaldo Chiavone Filho. 2023. 91f. Dissertação (Mestrado em Engenharia Química) - Centro de Tecnologia, Universidade Federal do Rio Grande do Norte, Natal, 2023.; https://repositorio.ufrn.br/handle/123456789/57158Test

الإتاحة: https://repositorio.ufrn.br/handle/123456789/57158Test

المؤلفون: Costa, Ana Rita Damasceno

المساهمون: Gonçalves, Jardel Pereira, orcid:0000-0003-3484-3869, http://lattes.cnpq.br/5363080225273626Test, Kirchheim, Ana Paula, orcid:0000-0002-8241-0331, http://lattes.cnpq.br/4014435019322019Test, Albuquerque, Elaine Christine de Magalhães Cabral, orcid:0000-0002-3472-9129, http://lattes.cnpq.br/1624091546521389Test, Martínez, Erich David Rodríguez, orcid:0000-0003-1914-4541, http://lattes.cnpq.br/6109846594507875Test, Pontes, Karen Valverde, orcid:0000-0002-8208-0854, http://lattes.cnpq.br/5444380855577045Test, Fiuza Junior, Raildo Alves, orcid:0000-0001-8235-6876, http://lattes.cnpq.br/0513144318630937Test, Bielefeldt, Wagner Viana, orcid:0000-0003-3984-7703, http://lattes.cnpq.br/2314494393454115Test

مصطلحات موضوعية: Modelagem termodinâmica, Clínquer, Coprocessamento, Método de dosagem, Cimento, Impurezas, Gestão de resíduos, Thermodynamic modelling, Clinker, Coprocessing, Dosing method, Cement, Impurities, Waste management, CNPQ::ENGENHARIAS, CNPQ::ENGENHARIAS::ENGENHARIA CIVIL::CONSTRUCAO CIVIL::MATERIAIS E COMPONENTES DE CONSTRUCAO

وصف الملف: application/pdf

العلاقة: ABDUL-WAHAB, S. A. et al. An overview of alternative raw materials used in cement and clinker manufacturing. International Journal of Sustainable Engineering, v. 14, n. 4, p. 743–760, 2021. ABNT. NBR 16697: Cimento Portland - Requisitos. Rio de Janeiro: Associação Brasileira de Normas Técnicas, 2018. AL-DHAMRI, H.; MELGHIT, K. Use of alumina spent catalyst and RFCC wastes from petroleum refinery to substitute bauxite in the preparation of Portland clinker. Journal of Hazardous Materials, v. 179, p. 852–859, jul. 2010. ALONSO-FARIÑAS, B. et al. Sustainable management of spent fluid catalytic cracking catalyst from a circular economy approach. Waste Management, v. 110, p. 10–19, 2020. AMER, A. I. H. et al. Maximize the use of municipal waste generated by the hydrogen peroxide industry in the production of high-quality refractory CAC. Scientific Reports, v. 12, 1 dez. 2022. ANDERSSON, J. O. et al. Thermo-Calc & DICTRA, computational tools for materials science. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, v. 26, n. 2, p. 273–312, 2002. ANDRADE NETO, J. DA S.; DE LA TORRE, A. G.; KIRCHHEIM, A. P. Effects of sulfates on the hydration of Portland cement – A review. Construction and Building Materials, v. 279, 12 abr. 2021. ANDRADE NETO, J. S. et al. The role of sodium and sulfate sources on the rheology and hydration of C3A polymorphs. Cement and Concrete Research, v. 151, 1 jan. 2022. ARANDA, M. A. G.; DE LA TORRE, Á. G.; LEÓN-REINA, L. Rietveld quantitative phase analysis of OPC clinkers, cements and hydration products. Reviews in Mineralogy and Geochemistry, v. 74, p. 169–209, 2012. ASTM. C150/C150M - Standard specification for Portland cement. [s.l.] American Society for Testing and Materials, 2019. ATALLAH, E. et al. Thermodynamic equilibrium approach to predict the inorganic interactions of ash from biomass and their mixtures: A critical assessment. Fuel Processing Technology, v. 235, 1 out. 2022. BALE, C. W. et al. Reprint of: FactSage thermochemical software and databases, 2010–2016. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, v. 55, p. 1–19, 2016. BALTAKYS, K. et al. Formation and hydration of eco-friendly cement using industrial wastes as raw materials. Scientific Reports, v. 11, 1 dez. 2021. BARROS, A. M.; TENÓRIO, J. A. S.; ESPINOSA, D. C. R. Evaluation of the incorporation ratio of ZnO, PbO and CdO into cement clinker. Journal of Hazardous Materials, v. 112, n. 1–2, p. 71–78, 9 ago. 2004. BARRY, T. I.; GLASSER, F. P. Calculations of Portland cement clinkering reactions. Advances in Cement Research, v. 12, n. 1, p. 19–28, 2000. BECKHOFF, B. et al. Handbook of practical X-ray fluorescence analysis. Heidelberg: Springer, 2006. BHATTY, J. I.; MILLER, F. M.; KOSMATKA, S. H. Innovations in Portland cement manufacturing. 2. ed. Skokie: Portland Cement Association, 2011. BLINOVA, Irina et al. Potential hazard of lanthanides and lanthanide-based nanoparticles to aquatic ecosystems: data gaps, challenges and future research needs derived from bibliometric analysis. Nanomaterials, v. 10, n. 2, p. 328, 2020. BLOIS, L.; LAY-EKUAKILLE, A. Environmental impacts from atmospheric emission of heavy metals: A case study of a cement plant. Measurement: Sensors, v. 18, 1 dez. 2021. BOGUE, R. H. Calculation of the compounds in Portland cement. Industrial and Engineering Chemistry - Analytical Edition, v. 1, n. 4, p. 192–197, 1929. BOGUSH, A. A. et al. Co-processing of raw and washed air pollution control residues from energy-from-waste facilities in the cement kiln. Journal of Cleaner Production, v. 254, 1 maio 2020. BOLIO-ARCEO, H.; GLASSER, F. P. Formation of spurrite, Ca5(SiO4)2CO3. Cement and Concrete Research, v. 20, n. 2, p. 301–307, 1990. BUURMANS, I. L. C. et al. Structure and acidity of individual Fluid Catalytic Cracking catalyst particles studied by synchrotron-based infrared micro-spectroscopy. Microporous and Mesoporous Materials, v. 166, p. 86–92, 15 jan. 2013. CALLIGARIS, G. A. et al. On the quantitative phase analysis and amorphous content of triacylglycerols materials by X-ray Rietveld method. Chemistry and Physics of Lipids, v. 212, n. December 2017, p. 51–60, 2018. CAMPBELL, D. H. Microscopical examination and interpretation of portland cement and clinker. 2. ed. Skokie: Portland Cement Association, 1999. CANTALUPPI, M. et al. An insight on the effect of sodium and silicon on microstructure and crystallography of high alumina cements. Cement and Concrete Research, v. 148, 1 out. 2021. CHEN, H. L.; TSENG, Y. S.; HSU, K. C. Spent FCC catalyst as a pozzolanic material for high-performance mortars. Cement and Concrete Composites, v. 26, n. 6, p. 657–664, 2004. CHENG, S. et al. Experimental phase equilibria studies in the FeO-Fe2O3-CaO-SiO2 system and the subsystems CaO-SiO2, FeO-Fe2O3-SiO2 in air. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v. 52, p. 1891–1914, 1 jun. 2021. CHOU, M.-I. et al. Making fired bricks with spent equilibrium catalyst-a technical feasibility study. Journal of Solid Waste Technology and Management, v. 35, n. 4, p. 200–208, 2009. COLOMBO, P. et al. Inertization and reuse of waste materials by vitrification and fabrication of glass-based products. Current Opinion in Solid State and Materials Science, v. 7, n. 3, p. 225–239, 2003. CONG, J. et al. Volatilization of heavy metals (As, Pb, Cd) during co-processing in cement kilns. Environmental Engineering Science, v. 32, n. 5, p. 425–435, 2015. CONGYUN, H. et al. Effect of minor elements on silicate cement clinker. Journal of Wuhan University of Technology - Mater. Sci. Ed., v. 20, n. 3, p. 116–118, 2005. CUI, S. et al. Effect and incorporation mechanism of heavy metal elements in hazardors industrial wastes during clinker formation. Journal-Chinese Ceramic Society, v. 32, n. 10, p. 1264–1270, 2004. CZERWINSKI, F. Cerium in aluminum alloys. Journal of Materials Science, v. 55, n. 1, p. 24–72, 1 jan. 2020. DA, Y. et al. The effect of spent petroleum catalyst powders on the multiple properties in blended cement. Construction and Building Materials, v. 231, 20 jan. 2020. DA, Y. et al. Utilizing titanium-containing pickling sludge to prepare raw meal for clinker production. Construction and Building Materials, v. 268, p. 121216, 2021a. DA, Y. et al. Studies on the formation and hydration of tricalcium silicate doped with CaF2 and TiO2. Construction and Building Materials, v. 266, 10 jan. 2021b. DAHL, L. A. New study on reactions in burning cement raw materials. Skokie: Portland Cement Association, 1956. DAVIES, R. H. et al. MTDATA - Thermodynamic and phase equilibrium software from the national physical laboratory. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, v. 26, n. 2, p. 229–271, 2002. DE LA TORRE, Á. G. et al. In situ synchrotron powder diffraction study of active belite clinkers. Journal of Applied Crystallography, v. 40, n. 6, p. 999–1007, 2007. DE NOIRFONTAINE, M. N. et al. CALPHAD formalism for Portland clinker: Thermodynamic models and databases. Journal of Materials Science, v. 47, n. 3, p. 1471–1479, 2012. DE OLIVEIRA, J. S. et al. Influence of milling of a reused FCC catalytic waste on the early hydration stages of a special class cement. Journal of Thermal Analysis and Calorimetry, v. 147, n. 4, p. 2923–2934, 1 fev. 2022. DEDAVID, B. A.; GOMES, C. I.; MACHADO, G. Microscopia eletrônica de varredura: Aplicações e preparação de amostras. Porto Alegre: EDIPUCRS, 2007. DENG, Q. et al. Mechanism of C4AF Content and heat-curing process on the abrasion resistance of high ferrite cement. Journal Wuhan University of Technology, Materials Science Edition, v. 37, n. 3, p. 440–449, 1 jun. 2022. DEOLALKAR, S. P. Designing Green Cement Plants. Oxford: Butterworth-Heinemann (Elsevier), 2016. DIN. DIN 51730 Determination of fusibility of fuel ash (German). [s.l.] Deutsches Institut für Normung, 2022. DING, Z. et al. First-principle insights of initial hydration behavior affected by copper impurity in alite phase based on static and molecular dynamics calculations. Journal of Cleaner Production, v. 398, 20 abr. 2023. DOS SANTOS, K. R. et al. Stabilization/solidification of toxic elements in cement pastes containing a spent FCC catalyst. Water, Air, and Soil Pollution, v. 232, n. 2, 1 fev. 2021. DU, X. et al. Cation location and migration in lanthanum-exchanged NaY zeolite. Chinese Journal of Catalysis, v. 34, p. 1599–1607, 2013. DUBINA, E.; WADSÖ, L.; PLANK, J. A sorption balance study of water vapour sorption on anhydrous cement minerals and cement constituents. Cement and Concrete Research, v. 41, n. 11, p. 1196–1204, nov. 2011. DURDZIŃSKI, P. T. et al. Phase assemblage of composite cements. Cement and Concrete Research, v. 99, n. September 2016, p. 172–182, 2017. ELAKNESWARAN, Y. et al. Characteristics of ferrite-rich Portland cement: Comparison with ordinary Portland cement. Frontiers in Materials, v. 6, 15 abr. 2019. EN. EN 197-1 - Cement. Composition, specifications and conformity criteria for common cements. [s.l.] British Standards Institution, 2011. FAURE, A. et al. Beneficial reuse of dam fine sediments as clinker raw material. Construction and Building Materials, v. 218, p. 365–384, 10 set. 2019. FERELLA, F.; INNOCENZI, V.; MAGGIORE, F. Oil refining spent catalysts: A review of possible recycling technologies. Resources, Conservation and Recycling, v. 108, p. 10–20, 2016. FERNÁNDEZ-CARRASCO, L. et al. Infrared spectroscopy in the analysis of building and construction materials. Em: Infrared Spectroscopy - Materials Science, Engineering and Technology. [s.l: s.n.]. p. 369–382. GHAZI, A. B.; JAMSHIDI-ZANJANI, A.; NEJATI, H. Clinkerisation of copper tailings to replace Portland cement in concrete construction. Journal of Building Engineering, v. 51, 1 jul. 2022. GHAZIZADEH, S. et al. Estimation of standard molar entropy of cement hydrates and clinker minerals. Cement and Concrete Research, v. 136, 1 out. 2020. GIES, A.; KNÖFEL, D. Influence of sulfur on the composition of belite-rich cement clinkers an the technological properties of the resulting cements. Cement and Concrete Research, v. 17, p. 317–328, 1987. GINEIKA, A.; SIAUCIUNAS, R.; BALTAKYS, K. Synthesis of wollastonite from AlF3-rich silica gel and its hardening in the CO2 atmosphere. Scientific Reports, v. 9, 1 dez. 2019. GINEYS, N. et al. Incorporation of trace elements in Portland cement clinker: Thresholds limits for Cu, Ni, Sn or Zn. Cement and Concrete Research, v. 41, p. 1177–1184, nov. 2011. GLASSER, F. P. The formation and thermal stability of spurrite, Ca5(SiO4)2CO3. Cement and Concrete Research, v. 3, n. 1, p. 23–28, 1973. GLOTER, A. et al. TEM evidence of perovskite-brownmillerite coexistence in the Ca(AlxFe1-x)O2.5 system with minor amounts of titanium and silicon. Physics and Chemistry of Minerals, v. 27, p. 504–513, 2000. GOBBO, L.; SANT’AGOSTINO, L.; GARCEZ, L. C3A polymorphs related to industrial clinker alkalies content. Cement and Concrete Research, v. 34, n. 4, p. 657–664, abr. 2004. GOSWAMI, G.; PADHY, B. P.; PANDA, J. D. Thermal analysis of spurrite from a rotary cement kiln. Journal of Thermal Analysis, v. 35, p. 1129–1136, 1989. GUO, X. et al. Effects of phosphorus and iron on the composition and property of Portland cement clinker utilized incinerated sewage sludge ash. Construction and Building Materials, v. 341, 9 maio 2022. HANEIN, T.; GLASSER, F. P.; BANNERMAN, M. Thermodynamics of Portland cement clinkering. 14th International Congress on the Chemistry of Cement (ICCC 2015). Anais.Beijing, China: 2015. HANEIN, T.; GLASSER, F. P.; BANNERMAN, M. N. Thermodynamic data for cement clinkering. Cement and Concrete Research, v. 132, 1 jun. 2020. HARADA, T.; TANAKA, H.; YAMASHITA, M. Influences of lanthanum oxide in clinker on the properties of cement. Cement Science and Concrete Technology, v. 67, p. 144–150, 2013. HARILAL, M. et al. Electrical and optical properties of NdAlO3 synthesized by an optimized combustion process. Materials Characterization, v. 90, p. 7–12, 2014. HAYWARD, S. A. et al. Transformation processes in LaAlO3: Neutron diffraction, dielectric, thermal, optical, and Raman studies. Physical Review B - Condensed Matter and Materials Physics, v. 72, 1 ago. 2005. HE, Y. et al. Preferable adsorption of phosphate using lanthanum-incorporated porous zeolite: Characteristics and mechanism. Applied Surface Science, v. 426, p. 995–1004, 31 dez. 2017. HER, S. et al. Feasibility study on utilization of pulverized eggshell waste as an alternative to limestone in raw materials for Portland cement clinker production. Construction and Building Materials, v. 324, 21 mar. 2022. HERTEL, T. et al. Boosting the use of bauxite residue (red mud) in cement - Production of an Fe-rich calciumsulfoaluminate-ferrite clinker and characterisation of the hydration. Cement and Concrete Research, v. 145, 1 jul. 2021. HEWLETT, P. C.; LISKA, M. (EDS.). Lea’s Chemistry of Cement and Concrete. Fifth ed. [s.l.] Butterworth-Heinemann, 2019. HEWLETT, P.; LISKA, M. Lea’s chemistry of cement and concrete. 5. ed. Oxford: Butterworth-Heinemann (Elsevier), 2017. HÖKFORS, B. et al. On the phase chemistry of Portland cement clinker. Advances in Cement Research, v. 27, n. 1, p. 50–60, 1 jan. 2015. HÖKFORS, B.; ERIKSSON, M.; VIGGH, E. Modelling the cement process and cement clinker quality. Advances in Cement Research, v. 26, n. 6, p. 311–318, 11 nov. 2014. HOU, G. et al. Composition design and pilot study of an advanced energy-saving and low-carbon rankinite clinker. Cement and Concrete Research, v. 127, 1 jan. 2020. HU, Y. et al. The composition and performance of alite-ye’elimite clinker produced at 1300 °C. Cement and Concrete Research, v. 107, p. 41–48, 1 maio 2018. HUANG, X. et al. The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete. Construction and Building Materials, v. 197, p. 99–106, 10 fev. 2019. HUNTZINGER, D. N.; EATMON, T. D. A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies. Journal of Cleaner Production, v. 17, p. 668–675, maio 2009. IEA. Global cement production in the Net Zero Scenario, 2010-2030. [s.l: s.n.]. Disponível em: . ISO. 10426-1 - Cements and materials for well cementing - Part 1: Specification. [s.l.] International Organization for Standardization, 2009. ISTERI, V. et al. Production and properties of ferrite-rich CSAB cement from metallurgical industry residues. Science of the Total Environment, v. 712, 10 abr. 2020. ISTERI, V. et al. Ferritic calcium sulfoaluminate belite cement from metallurgical industry residues and phosphogypsum: Clinker production, scale-up, and microstructural characterisation. Cement and Concrete Research, v. 154, 1 abr. 2022. JUNG, I. H.; VAN ENDE, M. A. Computational thermodynamic calculations: FactSage from CALPHAD thermodynamic database to virtual process simulation. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v. 51, n. 5, p. 1851–1874, 1 out. 2020. JUNG, S. S.; SOHN, I. Crystallization behavior of the CaO-Al2O3-MgO system studied with a confocal laser scanning microscope. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v. 43B, p. 1530–1539, 1 dez. 2012. JUNG, S. S.; SOHN, I. Effect of FeO concentration on the crystallization of high-temperature CaO-Al2O3-MgO-FeO melts. Journal of the American Ceramic Society, v. 96, n. 4, p. 1309–1316, abr. 2013. KACIMI, L.; CYR, M.; CLASTRES, P. Synthesis of α’L-C2S cement from fly-ash using the hydrothermal method at low temperature and atmospheric pressure. Journal of Hazardous Materials, v. 181, n. 1–3, p. 593–601, set. 2010. KAHLENBERG, V. et al. Structural studies on Ca3Al4MgO10 (C3A2M)—A ternary phase in the system CaO–Al2O3–MgO. Journal of the American Ceramic Society, v. 102, p. 2084–2093, 1 abr. 2019. KARIM, M. R. et al. Heavy metals leaching behaviour assessment of palm oil clinker. Sains Malaysiana, v. 47, n. 3, p. 523–530, 2018. KIRCHHEIM, A. P. et al. Analysis of cubic and orthorhombic C3A hydration in presence of gypsum and lime. Journal of Materials Science, v. 44, p. 2038–2045, abr. 2009. KIRCHHEIM, A. P. et al. Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped C3A in the presence of sulfates. Inorganic Chemistry, v. 50, p. 1203–1212, 21 fev. 2011. KLEIB, J. et al. Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash. Case Studies in Construction Materials, v. 15, 17 jul. 2021. KRISHNAN, S. et al. Characterisation and hydration kinetics of β-C2S synthesised with K2SO4 as dopant. Cement and Concrete Research, v. 167, 1 maio 2023. KUMAR, K. S. Environmental impact assessment of a Proposed Bauxite mining using Rapid Impact Assessment Matrix Method. International Journal of Applied Environmental Sciences, v. 5, n. 1, p. 29–38, 2010. KURDOWSKI, W. Cement and concrete chemistry. [s.l.] Springer, 2014. LAMAS, W. D. Q.; PALAU, J. C. F.; CAMARGO, J. R. DE. Waste materials co-processing in cement industry: Ecological efficiency of waste reuse. Renewable and Sustainable Energy Reviews, v. 19, p. 200–207, 2013. LE SAOUT, G.; IDIR, R.; ROUX, J. C. Characterisation of Perovskites in a calcium sulfo aluminate cement. Em: GLAGOLEV, S. (Ed.). 14th International Congress for Applied Mineralogy (ICAM2019). Belgorod: Springer Proceedings in Earth and Environmental Sciences, 2019. p. 339–343. LEE, M.-Y. et al. Potential risk of exposure to heavy metals from co-processing of secondary wastes in the Republic of Korea. Journal of Environmental Management, v. 286, 15 maio 2021. LEMOS, M. S.; DA CUNHA, A. L. C.; DWECK, J. A study of cement Type II hydration partially substituted by Brazilian spent cracking catalyst fines: Part I. Non-conventional differential thermal analysis. Journal of Thermal Analysis and Calorimetry, v. 130, n. 1, p. 573–584, 2017. LI, J. et al. Effect of ZnO on the whiteness of white Portland cement clinker. Cement and Concrete Research, v. 143, 1 maio 2021. LIANG, Z. et al. Preparation of alumina abrasion-resistant ceramic grinding ball with spent FCC equilibrium catalyst. China Petroleum Processing and Petrochemical Technology, v. 12, n. 4, p. 23–29, 2010. LIANG, Z. et al. A primary study on preparation of mullite with solid waste. Advanced Materials Research, v. 233–235, p. 1067–1072, 2011. LIN, K. L. et al. Recycling of spent catalyst and waste sludge from industry to substitute raw materials in the preparation of Portland cement clinker. Sustainable Environment Research, v. 27, p. 251–257, 1 set. 2017. LIN, Y. et al. Utilization of municipal sewage sludge as additives for the production of eco-cement. Journal of Hazardous Materials, v. 213–214, p. 457–465, 2012. LIU, L. et al. Leaching behavior of vanadium from spent SCR catalyst and its immobilization in cement-based solidification/stabilization with sulfurizing agent. Fuel, v. 243, p. 406–412, 1 maio 2019. LIU, W. et al. Effects of Municipal Sewage Sludge on Fixation of Cr, Ni, Cu, and Zn during Co-processing of Heavy Metal-containing Waste in Cement Kilns. Journal Wuhan University of Technology, Materials Science Edition, v. 33, n. 4, p. 892–900, 2018. LIU, Y. et al. Evaluation on recycled clinker production and properties from regeneration of completely recycle concrete. Construction and Building Materials, v. 301, 27 set. 2021. LOTHENBACH, B. et al. Thermodynamic modelling: state of knowledge and challenges. Advances in Cement Research. Anais.Thomas Telford Services Ltd, 1 out. 2010. LUSQUIÑOS, F. et al. Production of calcium phosphate coatings on Ti6Al4V obtained by Nd:Yttrium-aluminum-garnet laser cladding. Journal of Applied Physics, v. 90, n. 8, p. 4231–4236, out. 2001. LV, C. et al. Phase evolution and pulverization mechanism of self-pulverizing carbonatable clinkers. Journal of the American Ceramic Society, p. 1391–1412, 1 fev. 2022. LV, D. et al. Effects of Co-processing sewage sludge in the cement kiln on PAHs, heavy metals emissions and the surrounding environment. International Journal of Environmental Research and Public Health, v. 15, n. 4, 2018. LV, X. et al. Hydration, microstructure characteristics, and mechanical properties of high-ferrite Portland cement in the presence of fly ash and phosphorus slag. Cement and Concrete Composites, v. 136, 1 fev. 2023. MADEJ, D.; BORIS, R. Synthesis, characterization and hydration analysis of Ba2+-, Cu2+- or Bi3+-doped CaO–Al2O3–ZrO2-based cements. Journal of Thermal Analysis and Calorimetry, v. 138, n. 6, p. 4331–4340, 1 dez. 2019. MADSEN, I. C.; SCARLETT, N. V. Y.; KERN, A. Description and survey of methodologies for the determination of amorphous content via X-ray powder diffraction. Zeitschrift fur Kristallographie, v. 226, n. 12, p. 944–955, 2011. MANI, U. et al. Effect of fly ash inhalation on biochemical and histomorphological changes in rat liver. Ecotoxicology and Environmental Safety, v. 68, n. 1, p. 126–133, 2007. MARINHO, M. B.; GLASSER, F. P. Polymorphism and phase changes in the ferrite phase of cements induced by titanium substitution. Cement and Concrete Research, v. 14, n. 3, p. 360–368, 1984. MARKAD, V. L. et al. Biomarker responses in the earthworm, Dichogaster curgensis exposed to fly ash polluted soils. Ecotoxicology and Environmental Safety, v. 118, p. 62–70, 2015. MATOS, P. R. et al. Strategies for XRD quantitative phase analysis of ordinary and blended Portland cements. Cement and Concrete Composites, v. 131, 1 ago. 2022a. MATOS, S. R. C. et al. Synthesis and hydration of ye’elimite-containing cement (YCC) produced with spent fluid catalytic cracking catalyst. Construction and Building Materials, v. 359, 12 dez. 2022b. MATOS, S. R. C. Coprocessamento do resíduo catalítico (SFCC) na produção de clínqueres para cimentos especiais: cimento classe G e cimentos contendo ye’elimita. Tese de Doutorado—Salvador: Universidade Federal da Bahia, 2023. MEHTA, P. K.; MONTEIRO, P. J. M. Concrete: Microstructure, properties and materials. 4. ed. New York: McGraw-Hill Professional Publishing, 2013. MÉRIOT, A. et al. From selective dissolution to crystal chemistry of brownmillerite in sulfate resisting cement. Journal of the American Ceramic Society, v. 106, p. 709–721, 1 jan. 2023. MIDGLEY, C. M. The crystal structure of β dicalcium silicate. Acta Crystallographica, v. 5, n. 3, p. 307–312, 2 maio 1952. MISHRA, R. K. et al. A force field for tricalcium aluminate to characterize surface properties, initial hydration, and organically modified interfaces in atomic resolution. Dalton Transactions, v. 43, n. 27, p. 10602–10616, 21 jul. 2014. MISHRA, R. K.; FLATT, R. J.; HEINZ, H. Force field for tricalcium silicate and insight into nanoscale properties: Cleavage, initial hydration, and adsorption of organic molecules. Journal of Physical Chemistry C, v. 117, n. 20, p. 10417–10432, 23 maio 2013. MITTEMEIJER, E. J.; SCARDI, P. Diffraction analysis of the microstructure of materials. 1. ed. New York: Springer-Verlag Berlin Heidelberg, 2004. MOHAMED, B. et al. Inter-comparative study of quantitative methods of industrial clinker. Journal Wuhan University of Technology, Materials Science Edition, v. 32, n. 6, p. 1250–1260, 1 dez. 2017. MONTOYA, D. A. et al. Revisiting the iron-rich “ordinary Portland cement” towards valorisation of wastes: study of Fe-to-Al ratio on the clinker production and the hydration reaction. Materials and Structures, v. 54, n. 30, 1 fev. 2021. MORSLI, K. et al. Quantitative phase analysis of laboratory-active belite clinkers by synchrotron powder diffraction. Journal of the American Ceramic Society, v. 90, n. 10, p. 3205–3212, 2007. MUHAMMED, M. A.; AMIR, A. A.-H. A.; SHUKUR, F. A. Corrosion mechanism of refractory bricks lining the cement kiln. The Iraqi Journal for Mechanical and Material Engineering, v. 9, n. 2, 2009. NAGAO, M. et al. Ionic conductive and photocatalytic properties of cementitious materials: Calcium silicate hydrate and calcium aluminoferrite. Journal of Materials Chemistry A, v. 8, n. 30, p. 15157–15166, 14 ago. 2020. NEVES JUNIOR, A. et al. Determination of CO2 capture during accelerated carbonation of engineered cementitious composite pastes by thermogravimetry. Journal of Thermal Analysis and Calorimetry, v. 138, n. 1, p. 97–109, 2019. NESMERAK, K. Lanthanide/actinide toxicity. Encyclopedia of metalloproteins. Springer, New York, p. 1098-1103, 2013. NGUYEN, L. P. et al. Production of high purity rare earth mixture from iron-rich spent fluid catalytic cracking (FCC) catalyst using acid leaching and two-step solvent extraction process. Korean Journal of Chemical Engineering, v. 35, n. 5, p. 1195–1202, 2018. NOGUCHI, N. et al. Hydration of ferrite-rich Portland cement: Evaluation of Fe-hydrates and Fe uptake in calcium-silicate-hydrates. Construction and Building Materials, v. 288, 21 jun. 2021. NUNES, S.; COSTA, C. Numerical optimization of self-compacting mortar mixture containing spent equilibrium catalyst from oil refinery. Journal of Cleaner Production, v. 158, p. 109–121, 2017. PACEWSKA, B. et al. Modification of the properties of concrete by a new pozzolan - A waste catalyst from the catalytic process in a fluidized bed. Cement and Concrete Research, v. 32, n. 1, p. 145–152, 2002. PACEWSKA, B.; WILIŃSKA, I.; BUKOWSKA, M. Hydration of cement slurry in the presence of spent cracking catalyst. Journal of Thermal Analysis and Calorimetry, v. 60, n. 1, p. 71–78, 2000. PAPAMARKOU, S. et al. Vitrified medical wastes bottom ash in cement clinkerization. Microstructural, hydration and leaching characteristics. Science of the Total Environment, v. 635, p. 705–715, 2018. PEYS, A. et al. Sustainable iron-rich cements: Raw material sources and binder types. Cement and Concrete ResearchElsevier Ltd, , 1 jul. 2022. PRASAD, K. et al. Thermodynamic assessment and experimental validation of clinker formation from blast furnace slag through lime addition. Ceramics International, v. 44, n. 16, p. 19434–19441, 1 nov. 2018. PRITULA, O.; SMRCˇOK, L.; BAUMGARTNER, B. On reproducibility of Rietveld analysis of reference Portland cement clinkers. Powder Diffraction, v. 18, n. 1, p. 16–22, 2003. PUERTAS, F. et al. Clinkers and cements obtained from raw mix containing ceramic waste as a raw material. Characterization, hydration and leaching studies. Cement and Concrete Composites, v. 32, n. 3, p. 175–186, 2010. RACT, P. G.; ESPINOSA, D. C. R.; TENÓRIO, J. A. S. Determination of Cu and Ni incorporation ratios in Portland cement clinker. Waste Management, v. 23, p. 281–285, 2003. RAMACHANDRAN, V. S. et al. Handbook of Thermal Analysis of Construction Materials. New York: Noyes Publications / William Andrew Publishing, 2002. RAMEZANI, A.; EMAMI, S. M.; NEMAT, S. Reuse of spent FCC catalyst, waste serpentine and kiln rollers waste for synthesis of cordierite and cordierite-mullite ceramics. Journal of Hazardous Materials, v. 338, p. 177–185, 2017. REMYA, G. R. et al. Optical and dielectric properties of nano GdAlO3. Materials Today: Proceedings. Anais.Elsevier Ltd, 2015. REN, X.; ZHANG, W.; YE, J. FTIR study on the polymorphic structure of tricalcium silicate. Cement and Concrete Research, v. 99, p. 129–136, 1 set. 2017. RESTREPO, E. et al. The potential of La-containing spent catalysts from fluid catalytic cracking as feedstock of mullite based refractories. Journal of the European Ceramic Society, v. 40, n. 15, p. 6162–6170, 2020. REYES, J. M. et al. Chemical and morphological characteristics of ALD Al2O3 thin-film surfaces after immersion in pH buffer solutions. Journal of The Electrochemical Society, v. 160, n. 10, p. B201–B206, 2013. RIZWAN, M. et al. A review on perovskite lanthanum aluminate (LaAlO3), its properties and applications. Materials Research Express, v. 6, n. 11, 27 set. 2019. RODRÍGUEZ, E. D. et al. Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process. Fuel, v. 109, p. 493–502, 2013. SAIDANI, S. et al. Role of dopants (B, P and S) on the stabilization of β-Ca2SiO4. Journal of the European Ceramic Society, v. 41, p. 880–891, 1 jan. 2021. SAMET, B.; SARKAR, S. L. The influence of calcium sulfate form on the initial hydration of clinkers containing different alkali combinations. Cement and Concrete Research, v. 27, n. 3, p. 369–380, 1997. SANTOS, K. R. et al. Stabilization/solidification of toxic elements in cement pastes containing a spent FCC catalyst. Water, Air, & Soil Pollution, v. 232, n. 2, p. 1–17, 2021. SARKAR, P. K.; MITRA, N. Molecular mechanisms of tricalcium aluminate under tensile loads. Computational Materials Science, v. 154, p. 547–556, 1 nov. 2018. SCRIVENER, K. et al. Research needs for cementitious building materials with focus on europe. RILEM Technical Letters, v. 7, p. 220–252, 6 jul. 2022. SENGUPTA, P. Refractories for the cement industry. [s.l.] Springer International Publishing, 2020. SHARMA, M. et al. Limestone calcined clay cement and concrete: A state-of-the-art review. Cement and Concrete Research, v. 149, 1 nov. 2021. SHARYGIN, V. V; SOKOL, E. V; VAPNIK, Y. Minerals of the pseudobinary perovskite-brownmillerite series from combustion metamorphic larnite rocks of the Hatrurim Formation (Israel). Russian Geology and Geophysics, v. 49, n. 10, p. 709–726, out. 2008. SHIMADA, M. et al. Phase transformation of Gd4Al2O9 at high temperature. Key Engineering Materials, v. 132–136, p. 647–650, abr. 1997. SHIMADA, M.; SAKAMOTO, T.; YAMANE, H. Preparation and high temperature strength of Gd4Al2O9/MgO composites. Ceramic Materials and Components for Engines, p. 469–470, 2001. SHRIVASTAVA, V.; NAGARAJAN, R. Iron substitution in PrAlO3 perovskite leading to structural transformation and multiferroicity. Ceramics International, v. 47, n. 16, p. 22957–22964, 15 ago. 2021. SILVA, J. S. et al. Alkali-activation of spent fluid cracking catalysts for CO2 capture. Microporous and Mesoporous Materials, v. 232, p. 1–12, 15 set. 2016. SIMONI, M. et al. Producing cement clinker assemblages in the system: CaO-SiO2-Al2O3-SO3-CaCl2-MgO. Cement and Concrete Research, v. 144, 1 jun. 2021. SIMONI, M. et al. Decarbonising the lime industry: State-of-the-art. Renewable and Sustainable Energy ReviewsElsevier Ltd, , 1 out. 2022. SINGH, J.; KALAMDHAD, A. S. Assessment of bioavailability and leachability of heavy metals during rotary drum composting of green waste (Water hyacinth). Ecological Engineering, v. 52, p. 59–69, 2013. SINYOUNG, S.; KAJITVICHYANUKUL, P. Influence of Vanadium on Cement Properties and Leaching Analysis. Advanced Materials Research, v. 1103, p. 113–119, maio 2015. SNELLINGS, R.; BAZZONI, A.; SCRIVENER, K. The existence of amorphous phase in Portland cements: Physical factors affecting Rietveld quantitative phase analysis. Cement and Concrete Research, v. 59, p. 139–146, 2014. SOBIK-SZOŁTYSEK, J.; WYSTALSKA, K. Coprocessing of sewage sludge in cement kiln. [s.l.] Elsevier Inc., 2019. SRIWONG, C. et al. Synthesis, microstructure, multifunctional properties of mayenite Ca12Al14O33 (C12A7) cement and graphene oxide (GO) composites. Scientific Reports, v. 10, 1 dez. 2020. SU, N. et al. Reuse of waste catalysts from petrochemical industries for cement substitution. Cement and Concrete Research, v. 30, p. 1773–1783, 2000. SUHERMAN, P. M. et al. Determination of amorphous phase levels in Portland cement clinker. Powder Diffraction, v. 17, n. 3, p. 178–185, set. 2002. SUN, D. D. et al. Stabilization of heavy metals on spent fluid catalytic cracking catalyst using marine clay. Water Science and Technology, v. 44, n. 10, p. 285–291, 2001. TANG, Y. et al. Controlling the soundness of Portland cement clinker synthesized with solid wastes based on phase transition of MgNiO2. Cement and Concrete Research, v. 157, 4 maio 2022. TAO, Y. et al. Understanding the zinc incorporation into silicate clinker during waste co-disposal of cement kiln: A density functional theory study. Journal of Cleaner Production, v. 232, p. 329–336, 2019. TAYLOR, H. F. W. Modification of the Bogue calculation. Advances in Cement Research, v. 2, n. 6, p. 73–77, 1989. TAYLOR, H. F. W. Cement chemistry. 2. ed. London: Thomas Telford, 1997. TAZUDDIN, A.; AIYER, H.; CHATTERJEE, A. Thermodynamic simulation in evaluating the role of minor oxides and mineralizers in Portland cement clinker phase formation. SN Applied Sciences, v. 2, 1 out. 2020. THOMPSON, D.; ARGENT, B. B. Modelling trace and alkali mobilisation in the rotary cement kiln. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, v. 116, n. 2, p. 115–122, jun. 2007. TOBY, B. H.; VON DREELE, R. B. GSAS-II: The genesis of a modern open-source all purpose crystallography software package. Journal of Applied Crystallography, v. 46, n. 2, p. 544–549, 2013. TRAN, Y. T. et al. Natural zeolite and its application in concrete composite production. Composites Part B: Engineering, v. 165, p. 354–364, 15 maio 2019. TROCHEZ, J. J. et al. Synthesis of geopolymer from spent FCC: Effect of SiO2/Al2O3 and Na2O/SiO2 molar ratios. Materiales de Construcción, v. 65, n. 317, 1 jan. 2015. VARGAS, F. et al. Solid-state synthesis of mullite from spent catalysts for manufacturing refractory brick coatings. Ceramics International, v. 44, p. 3556–3562, 2018. VELISSARIOU, D. et al. A combined study of the performance and hydration of a Class G oil-well cement derived from Greek raw materials. Construction and Building Materials, v. 197, p. 63–71, 10 fev. 2019. VDZ, Hrsg. Zementindustrie im Überblick 2021/2022. Düsseldorf, 2021. Disponível em: https://vdz.info/ziue21Test WANG, J. et al. Moisture adsorption and desorption properties of colloidal silicon dioxide and its impact on layer adhesion of a bilayer tablet formulation. Journal of Excipients and Food Chemicals, v. 5, n. 1, p. 21–31, 2014. WANG, L. et al. Simulation of heavy metals behaviour during Co-processing of fly ash from municipal solid waste incineration with cement raw meal in a rotary kiln. Waste Management, v. 144, p. 246–254, 1 maio 2022. WANG, W. et al. Calculation and verification for the thermodynamic data of 3CaO·3Al2O3·CaSO4. Thermodynamics and Chemical Engineering Data: Chinese Journal of Chemical Engineering, v. 19, n. 3, p. 489–495, 2011. WEISS, D. Improved high-temperature aluminum alloys containing cerium. Journal of Materials Engineering and Performance, v. 28, n. 4, p. 1903–1908, 1 abr. 2019. WINTER, N. Understanding cement. WHD Microanalysis Consultants Ltd, p. 196, 2009. XUE, Y. et al. Interaction of spent FCC catalyst and asphalt binder: Rheological properties, emission of VOCs and immobilization of metals. Journal of Cleaner Production, v. 259, 20 jun. 2020. YU, H. YAN et al. Mineral transition and formation mechanism of calcium aluminate compounds in CaO-Al2O3-Na2O system during high-temperature sintering. International Journal of Minerals, Metallurgy and Materials, v. 27, n. 7, p. 924–932, 1 jul. 2020. ZAJAC, M. et al. Late hydration kinetics: Indications from thermodynamic analysis of pore solution data. Cement and Concrete Research, v. 129, 1 mar. 2020. ZGAMBO, T. P. et al. Calorimetry of the hydration of calcium aluminates with various glass contents. Thermochimica Acta, v. 113, p. 331–339, 1987. ZHANG, G. et al. Mechanical properties of high-ferrite oil-well cement used in shale gas horizontal wells under various loads. Construction and Building Materials, v. 319, 14 fev. 2022a. ZHANG, K. et al. Development of high-ferrite cement: Toward green cement production. Journal of Cleaner Production, v. 327, 10 dez. 2021. ZHANG, W. et al. Influence of alumina modulus on formation of high-magnesium clinker and morphological evolution of MgO. Cement and Concrete Research, v. 162, 1 dez. 2022b. ZHANG, Y. et al. Study on the preparation and properties of high-belite cementitious materials from shield slag and calcium carbide slag. Construction and Building Materials, v. 355, 14 nov. 2022c. ZHANG, Z. et al. Solidification mechanisms of copper in ferrite-rich Portland cement and its action mechanism in mineral phase. Journal of Building Engineering, v. 58, 15 out. 2022d. ZHENG, X. et al. Synthesis and characterization of CeAlO3 via solid state method. Journal of Solid State Chemistry, v. 312, 1 ago. 2022. ZHU, J. et al. Revealing the doping mechanism of barium in sulfoaluminate cement clinker phases. Journal of Cleaner Production, v. 295, 1 maio 2021.; https://repositorio.ufba.br/handle/ri/38759Test

الإتاحة: https://repositorio.ufba.br/handle/ri/38759Test

المؤلفون: Igarashi, Edson Massakazu de Souza

مرشدي الرسالة: Castillo, Pedro Felipe Arce

مصطلحات موضوعية: Artificial neural networks, Biodiesel, Modelagem termodinâmica, Peng-Robinson, Redes neurais artificiais, Thermodynamic modeling

وصف الملف: application/pdf

الإتاحة: http://www.teses.usp.br/teses/disponiveis/97/97137/tde-21112017-135312Test/

المؤلفون: Oliveira, Lucas Aparecido, Cerqueira, Daniel Alves, Cardoso, Cássia Regina, Sousa, Nádia Guimarães

المصدر: Research, Society and Development; Vol. 11 No. 5; e48111528386
Research, Society and Development; Vol. 11 Núm. 5; e48111528386
Research, Society and Development; v. 11 n. 5; e48111528386
Research, Society and Development
Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI

مصطلحات موضوعية: Modelado Termodinámico, Anhidrous etanol, Simulação, Simulación, Modelagem Termodinâmica, Etanol Anhidro, Simulation, Thermodynamic modelling, Etanol anidro

وصف الملف: application/pdf

الوصول الحر: https://explore.openaire.eu/search/publication?articleId=od______3056::afe17d274e76503653dec181dbc9283fTest
https://rsdjournal.org/index.php/rsd/article/view/28386Test

المساهمون: FLORIAN ALAIN YANNICK PRADELLE

مصطلحات موضوعية: [pt] SOFC, [pt] CURVA DE POLARIZACAO, [pt] MODELAGEM TERMODINAMICA, [pt] CELULA A COMBUSTIVEL, [pt] PEMFC, [en] SOFC, [en] POLARIZATION CURVE, [en] THERMODYNAMIC MODELING, [en] FUEL CELL, [en] PEMFC

الإتاحة: https://doi.org/10.17771/PUCRio.acad.59922Test
https://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=59922@1Test
https://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=59922@2Test

المؤلفون: Medeiros, Lucas Henrique Gomes de

المساهمون: Sant'Ana, Hosiberto Batista de, Feitosa, Filipe Xavier

المصدر: Repositório Institucional da Universidade Federal do Ceará (UFC)
Universidade Federal do Ceará (UFC)
instacron:UFC

مصطلحات موضوعية: Densidade, Modelagem termodinâmica, Forças intermoleculares, Líquidos iônicos

الوصول الحر: https://explore.openaire.eu/search/publication?articleId=od______3056::11ae45918460c5fd2cea1346554ca163Test
http://www.repositorio.ufc.br/handle/riufc/65066Test

المؤلفون: Silva, Adriano Rafael Candido

المساهمون: Pereira, André Anderson Costa, http://lattes.cnpq.br/4679163500008135Test, http://lattes.cnpq.br/7259368242506463Test, Melo, Raffael Andrade Costa de, Souza, Joyce Azevedo Bezerra de

مصطلحات موضوعية: Modelagem termodinâmica, Equilíbrio líquido-vapor, NRTL, Monoetilenoglicol, XSEOS, CNPQ::ENGENHARIAS

وصف الملف: application/pdf

العلاقة: SILVA, Adriano Rafael Candido. Ajuste de parâmetros termodinâmicos de sistemas contendo água, monoetilenoglicol e cloreto de sódio em baixas pressões. 2022. 60 f. Trabalho de Conclusão de Curso (Graduação em Engenharia Química) - Departamento de Engenharia Química, Universidade Federal do Rio Grande do Norte, Natal, RN, 2022.; https://repositorio.ufrn.br/handle/123456789/49937Test

الإتاحة: https://repositorio.ufrn.br/handle/123456789/49937Test

المؤلفون: BRITO, Marco Antonio Rodrigues de

المساهمون: ARAÚJO, Marcus Costa de, MICHALEWICZ, Jacek Stanislaw, http://lattes.cnpq.br/2192954386106600Test, http://lattes.cnpq.br/4157405186898932Test, http://lattes.cnpq.br/4878832540144866Test

مصطلحات موضوعية: Gerador termoelétrico, Recuperação de calor residual, Motor de combustão interna, Modelagem termodinâmica, Gases de exaustão, Áreas::Engenharias::Engenharia Mecânica

وصف الملف: 61p.; application/pdf

العلاقة: BRITO, Marco Antonio Rodrigues de. Análise da utilização de geradores termoelétricos na recuperação de calor residual de exaustão em um motor de combustão interna. 2017. 61 f. TCC (Graduação) - Curso de Engenharia Mecânica, Departamento de Engenharia Mecânica, Universidade Federal de Pernambuco, Recife, 2017; https://repositorio.ufpe.br/handle/123456789/45828Test

الإتاحة: https://repositorio.ufpe.br/handle/123456789/45828Test