يعرض 1 - 2 نتائج من 2 نتيجة بحث عن '"Motor speed"', وقت الاستعلام: 0.64s تنقيح النتائج
  1. 1

    المصدر: E3S Web of Conferences, Vol 31, p 10008 (2018)

    الوصف: There are many phenomena that human are exposed to toxins from certain types such as of CO2, CO2 and CH4 gases. The device used to detect large amounts of CO, CO2, and CH4 gas in air in enclosed spaces using MQ 135 gas sensors of different types based on the three sensitivity of the Gas. The results of testing the use of sensors MQ 135 on the gas content of CO, CO2 and CH4 received by the sensor is still in the form of ppm based on the maximum ppm detection range of each sensor. Active sensor detects CO 120 ppm gas, CO2 1600 ppm and CH4 1ppm "standby 1" air condition with intermediate rotary fan. Active sensor detects CO 30 ppm gas, CO2 490 ppm and CH4 7 ppm "Standby 2" with low rotating fan output. Fuzzy rulebase logic for motor speed when gas detection sensor CO, CO2, and CH4 output controls the motion speed of the fan blower. Active sensors detect CO 15 ppm, CO2 320 ppm and CH4 45 ppm "Danger" air condition with high fan spin fan. At the gas level of CO 15 ppm, CO2 390 ppm and CH4 3 ppm detect "normal" AC sensor with fan output stop spinning.

  2. 2

    المصدر: E3S Web of Conferences, Vol 125, p 23013 (2019)

    الوصف: The incidence of poisoning due to carbon monoxide gas arising from drilling activities on the first floor of a building in the Kelapa Gading beauty clinic in Jakarta resulted in 17 people experiencing poisoning. In this study developing a device on the sensor used to detect CO and SO2 gas, in the air of a closed room using gas sensor MQ 135 and MQ 136. The results of testing the CO and SO2 gas gauges using samples of cigarette smoke and sulfur powder using MQ 135 and MQ 136 sensors with fuzzy rule base logic for motor speed to produce CO and SO2 gas, that obtained a value of 0.233 ppm SO2 gas safe conditions and gas input CO with the sensor obtained a value of 0.513 ppm, the condition is safe so that the output is 49.8 ppm, the condition of the fan blower does not rotate. Whereas when the reading value of 5.0 ppm is very concentrated and the CO gas input with the sensor is 13.8 ppm the condition is very concentrated producing an output of 228 ppm the very danger.