Total Porosity Measured for Shale Gas Reservoir Samples: A Case from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China

التفاصيل البيبلوغرافية
العنوان: Total Porosity Measured for Shale Gas Reservoir Samples: A Case from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China
المؤلفون: Xue Ding, Fangwen Chen, Shuangfang Lu, Zhao Hongqin, Yiwen Ju
المصدر: Minerals
Volume 9
Issue 1
Minerals, Vol 9, Iss 1, p 5 (2018)
بيانات النشر: Multidisciplinary Digital Publishing Institute, 2018.
سنة النشر: 2018
مصطلحات موضوعية: lcsh:QE351-399.2, 020209 energy, Mineralogy, 02 engineering and technology, 010502 geochemistry & geophysics, Feldspar, 01 natural sciences, 0202 electrical engineering, electronic engineering, information engineering, Organic matter, Porosity, Quartz, 0105 earth and related environmental sciences, chemistry.chemical_classification, shale gas reservoir, lcsh:Mineralogy, Geology, Porosimetry, Geotechnical Engineering and Engineering Geology, Permeability (earth sciences), chemistry, Longmaxi Formation, visual_art, visual_art.visual_art_medium, Clay minerals, Oil shale, Southeast Chongqing, total porosity
الوصف: Measuring total porosity in shale gas reservoir samples remains a challenge because of the fine-grained texture, low porosity, ultra-low permeability, and high content of organic matter (OM) and clay mineral. The composition content porosimetry method, which is a new method for the evaluation of the porosity of shale samples, was used in this study to measure the total porosity of shale gas reservoir samples from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China, based on the bulk and grain density values. The results from the composition content porosimetry method were compared with those of the Gas Research Institute method. The results showed that the composition content porosimetry porosity values of shale gas reservoir samples range between 2.05% and 5.87% with an average value of 4.04%. The composition content porosimetry porosity generally increases with increasing OM and clay content, and decreases with increasing quartz and feldspar content. The composition content porosimetry results are similar to the gas research institute results, and the differences between the two methods range from 0.05% to 1.52% with an average value of 0.85%.
وصف الملف: application/pdf
اللغة: English
تدمد: 2075-163X
DOI: 10.3390/min9010005
الوصول الحر: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f17ea569a4e57b7e196f82f65d274189Test
حقوق: OPEN
رقم الانضمام: edsair.doi.dedup.....f17ea569a4e57b7e196f82f65d274189
قاعدة البيانات: OpenAIRE
الوصف
تدمد:2075163X
DOI:10.3390/min9010005