Total Porosity Measured for Shale Gas Reservoir Samples: A Case from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China
العنوان: | Total Porosity Measured for Shale Gas Reservoir Samples: A Case from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China |
---|---|
المؤلفون: | Xue Ding, Fangwen Chen, Shuangfang Lu, Zhao Hongqin, Yiwen Ju |
المصدر: | Minerals Volume 9 Issue 1 Minerals, Vol 9, Iss 1, p 5 (2018) |
بيانات النشر: | Multidisciplinary Digital Publishing Institute, 2018. |
سنة النشر: | 2018 |
مصطلحات موضوعية: | lcsh:QE351-399.2, 020209 energy, Mineralogy, 02 engineering and technology, 010502 geochemistry & geophysics, Feldspar, 01 natural sciences, 0202 electrical engineering, electronic engineering, information engineering, Organic matter, Porosity, Quartz, 0105 earth and related environmental sciences, chemistry.chemical_classification, shale gas reservoir, lcsh:Mineralogy, Geology, Porosimetry, Geotechnical Engineering and Engineering Geology, Permeability (earth sciences), chemistry, Longmaxi Formation, visual_art, visual_art.visual_art_medium, Clay minerals, Oil shale, Southeast Chongqing, total porosity |
الوصف: | Measuring total porosity in shale gas reservoir samples remains a challenge because of the fine-grained texture, low porosity, ultra-low permeability, and high content of organic matter (OM) and clay mineral. The composition content porosimetry method, which is a new method for the evaluation of the porosity of shale samples, was used in this study to measure the total porosity of shale gas reservoir samples from the Lower Silurian Longmaxi Formation in Southeast Chongqing, China, based on the bulk and grain density values. The results from the composition content porosimetry method were compared with those of the Gas Research Institute method. The results showed that the composition content porosimetry porosity values of shale gas reservoir samples range between 2.05% and 5.87% with an average value of 4.04%. The composition content porosimetry porosity generally increases with increasing OM and clay content, and decreases with increasing quartz and feldspar content. The composition content porosimetry results are similar to the gas research institute results, and the differences between the two methods range from 0.05% to 1.52% with an average value of 0.85%. |
وصف الملف: | application/pdf |
اللغة: | English |
تدمد: | 2075-163X |
DOI: | 10.3390/min9010005 |
الوصول الحر: | https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f17ea569a4e57b7e196f82f65d274189Test |
حقوق: | OPEN |
رقم الانضمام: | edsair.doi.dedup.....f17ea569a4e57b7e196f82f65d274189 |
قاعدة البيانات: | OpenAIRE |
تدمد: | 2075163X |
---|---|
DOI: | 10.3390/min9010005 |